Add to Cart
4000BPH 4 Cavities Automatic PET/Plastic Bottle Blow Molding Machine Plant For Drinking Water Bottling Plant
PET manufacturing system is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle, oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping
rate, increase the production.
4). High adjusting performance to enable preheat the preforms
perfectly by adjust the voltage control area in the PLC, which
could adjust the temperature of the infrared lights in the
pre-heater, and keep the proper temperature and humidity in
variable.
5). High safeties with security automatic-locking device in each
mechanica laction, whichwill make the production into a perfect
safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and
noise.
7). Satisfaction with different atmospheric pressure for blowing
and mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links
to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe,reliable and unique design of the position of valve to
make the pneumatic diagram in the machine easier to understand.
11). Low cost,high efficiency,easy operation and maintenance etc,
profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any
flaws.
13). Easy for you to install,test and start up.
14). Low rejection rate: less than 0.2 percent.
Main part: | ||
Pneumatic part | Valve | SMC |
Cylinder | ||
Electricpart | PLC | LG |
Operating system | LG | |
Relay | OMRON | |
Infrared thermometer | America raytek | |
Note | All of the electrical components adopts CE,UL,CCC approved
international advanced high-tech product. | |
Main parameter: | ||
Model | FP-4000 | |
Productivity | Depend on bottle design | 3200-4000 PCS/H |
Product type | Body diameter | 20mm-100mm |
Height | 50mm-350mm | |
Neck diameter | 15mm-38mm | |
Mold | Cavity | 4 cavities |
Mold thick | 240mm | |
Mold | 500*500mm | |
Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
Rated Power | 49kw | |
Really use power | 14kw | |
Size | L*W*H | 1900*1860*1930mm |
Weight | 3600kg | |
Auxiliary equipment(preform unscrambler) | L*W*H | 2000*950*2480mm |
Weight | 250kg | |
Resin available | PET |
Details:
Application