Semi-automatic 4 CAVITY blow molding machine with auto preform
elevator, auto dropper
>>> Product Introduction:
Blow FP-B4 semiautomatic bottle blow molding machine is suitable
for producing PET plastic containers and bottles from 10-2000ml. It
is widely used to produce the carbonated bottle ,mineral water,
carbonated drink bottle, pesticide bottle oil bottle cosmetics,
wide-mouth bottle etc.
>>> Product Features:
● Adopting double crank to adjust mould, heavy locking mould,
stable and fast ,Adopt infrared oven to heat the perform ,the
perform rotated and heated equally.
● The air system has been divided into two parts: pneumatic action
part and bottle blow part to meet the different requirements for
the action and blow .It can provide sufficient and steady high
pressure for blowing large irregular shaped bottles.
● The machine is also equipped with muffler and oiling system to
lubricate the mechanical part of the machine.
● The machine can be operated in the step-by-step mode and the
semi-auto mode.
● The machine is small with low investment, easy and safe to
operate.
>>> Flow and Auxiliary machines:
HP Air Compressor → Air Tank → Air Filter → Air Dryer → Air Filter
→ Chiller → LP Air Compressor → Automatic Bottle Blowing Machine
1. Auxiliary Machine To operate this PET blowing machine, it also
need some auxiliary machines. such as air compressor, air filter,
air dryer, chiller and so on. we will equip the auxiliary machine
according to your need.
2. Bottle Preform If you need, we can also help you find the bottle
preform in china.
3. PET Bottle Mold Our PET blowing machine can produce various
shape bottles. we can according to your need to design your own
bottle and make mold for you.
4. Preform & Cap Molds We also can provide you with preform mold
and cap mold according to your demand.
>>> Technical Paramters:
| |
| Product material | PET |
Volume | 50ml-1500ml |
Ouput | 1400-2000BPH |
Max bottle length | 420mm |
Max bottle diameter | 40mm |
| Stretching stroke | 420mm |
Clamping force | 5.7T(56KN) |
Mould opening stroke | 210mm |
| Blowing machine (L×W×H) | 1600*1200*1610mm |
Blowing machine weight | 1000kg |
Heater (L×W×H) | 1870*630*1450mm |
Heater weight | 260kg |