Electric 60KN Hydraulic Battery Crimping Tool For Cu / Al Cable And Armoured Cable
Brand Name:Boyu
Certification:ISO9001
Model Number:TYNEC-60UNV
Minimum Order Quantity:20 pieces
Delivery Time:15~25 days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Electric Hydraulic Battery Crimping Tool For Cu/Al Cable And Armoured Cable
Technical Data
| Model | TYNEC-60UNV |
| Crimping force | 60KN |
| Stroke | 42mm |
| Crimping range | 16-300mm2 |
| Cutting range | 40mm Cu/Al cable and armoured cable |
| Punching range | 22.5-61.5 |
| Crimp/charge | 160times |
| Working cycle | 3-16s |
| Voltage | 18V |
| Capacity | 3.0Ah |
| Charging time | 45minutes |
| Package | Plastic case |
| Crimping die | 16.25.35.50.70.95.120.150.185.240.300mm2 |
| Punching & Die | 22.5,28.3,34.6,43.2,49.6,61.5mm |
| Blade | 1set |
| Adapter for crimping | 1pc |
| Adapter for punching | 1pc |
| 3/4" Draw stud/7/16"Draw stud | 1pc |
| Spacer | 1pc |
| Battery | 2pcs |
| Charger | 1pc(AC110-240V,50-60Hz) |
| Sealing ring of cylinder | 1set |
| Sealing ring of safety valve | 1set |
General features:
| A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal. |
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached. |
| The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion. |
| The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas. |
| Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries. |
| A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released. |
Technical Data
| Model | TYNEC-300 | TYNEC-300C | TYNEC-400 | TYNEC-400U |
| Crimping force | 60KN | 120KN | 130KN | 130KN |
| Crimping range | 16-300mm2 | 16-300mm2 | 16-400mm2 | 16-400mm2 |
| Stroke | 17mm | 32mm | 42mm | 20mm |
| Crimp/charge | 320times (Cu150mm2) | 320times (Cu150mm2) | 120times (Cu150mm2) | 120times (Cu150mm2) |
| Crimping cycle | 3-6s (depend on the size of cable) | 3-6s (depend on the size of cable) | 10-20s (depend on the size of cable) | 10-20s (depend on the size of cable) |
| Voltage | 18V | 18V | 18V | 18V |
| Capacity | 3.0Ah | 3.0Ah | 3.0Ah | 3.0Ah |
| Charging time | 45minutes | 45minutes | 45minutes | 45minutes |
| Package | Plastic case | Plastic case | Plastic case | Plastic case |
| Crimping die | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2 |
| Battery | 2pcs | 2pcs | 2pcs | 2pcs |
| Charger | 1pc (AC110-240V,50-60Hz) | 1pc (AC110-240V,50-60Hz) | 1pc (AC110-240V,50-60Hz) | 1pc (AC110-240V,50-60Hz) |
| Sealing ring of cylinder | 1set | 1set | 1set | 1set |
| Sealing ring of safety valve | 1set | 1set | 1set | 1set |
Electric 60KN Hydraulic Battery Crimping Tool For Cu / Al Cable And Armoured Cable
Inquiry Cart
0