53.3m Long Hippo Water Slide Games Inflatable longest Slide for beach

53.3m Long Hippo Water Slide Games Inflatable With One Slide And 4pieces Free Blowers

Applications:

This Hippo usually put beside beach, inflatable amusement park , huge square and so on , there have enough water for sycle and a lots of people play with it ,you can put some inflatable games beside for people to use when they slide down,very exciting.

Descriptions:

The Hippo consists of four parts, namely the leg sub-structure, the slide body, the slide extension and the landing bed. Thefollowing dimensions are rounded to the nearest foot and the weights are rounded to the nearest 10 lbs:

We use 0.55mm pvc tarpaulin material for the sides and leg sub-structure .The original size of this hippo is 53.3mL*14.3mW*11mH. the slides size is 3.6m wide, with 2steps go up, and one slide go down, the body of the hippo is 30m long, and 18.6x14.3m dimemsions is the leg structure.

Other 23.3m long included 15m extension and 8.3m landing bed.

The Hippo operates on two high output single horse power blowers, producing 7.5 inches of static pressure. Inflation time from start to finish is incredibly fast, taking only 15 to 20 minutes. Blowers must be plugged into GFI grounded circuits.
(A) United States & Canada: Inflate with 4 x 115v 2HP blowers.
(B) Other Countries: Inflate with 4 x 220v 2HP (check required voltage for your country).

Maximum wind load: 45 mph. For safety reasons, do not operate The Hippo in sustained winds exceeding 25 mph.

The slide can be easily cleaned with a cloth or light bristle brush. Use a silicone based solution to refurbish the vinyl. Rinse thoroughly and dry before storing.

To transport the slide, either use a 14 ft. truck with a minimium load capacity of 6,000 lbs.or use a 6ft x 12ft double-axle flatbed utility trailer with a 5,000 lb. carrying capacity and a vehicle with a minimum of 6,000 lb towing capacity. When storing the slide, The Hippo should be stored in a climate controlled storage unit. The slide will fit in a space no larger than 12ft x 6ft x 6ft high.

Our advantage of inflatable water games:

1) We make reinforcements everywhere for the big water park, the connection between items of the park are durable eyelets, the structure can make the giant water park connect very stable.

2) We install high quality air relief valve from UK on all the items of this water park, so the items can release air to a safety level automatically when the air pressure getting higher.

3) We use thick and big stainless steel anchor ring with durable anchor pads at the bottom of the inflatable

4) Material: We use best 0.55mm PVC tarpaulin for water games.
the best material is very important for the games. All inflatable games of Topfun are made by high durability fire-retardant PVC Tarpaulin, which has 3 layers, two coated side with a strong net inside. The flame retardant meet BS7837. Our material has improved by the SGS.

5) Printing: Digital print, silk print, or hand painting. The high level painting makes Topfun product will not be sticky and color fade, but sustain a long time. And it print quickly and in good quality. Further more, we make a liquid protecting film on the surface of digital printing,.

6) Blower/Pump: CE air pump: 220-240V; UL air pump: 110-120V

7) Strong package bags: We spread air out to help deflation before roll the game, then put a band belt outside to tie it. We will use tarpaulin bag which is same material as the games to package the units. So the packages will not be frazzled during delivery process. For big units, we will make extra handle band outside of the packages. In order to let you find your goods quickly, we will paste a mark paper with your order number.

8) Accessories: Repair kit(material and glue),air pump,carry bag

FAQ:

1. How about the sales terms and warranties?
Our products have been exporting to more than 50countries and regious around the world, 95% up abroad. Most products come with a one-year to three-year guarantee.
2. Do we make custom designs?
Yes, just submit your detailed renderings, and we can create your custom products. Allow at least three weeks to receive your custom shape in time.
3. What is available for international customers?
We sells products worldwide.We can make the necessary adjustments required to meet your local power systems.Payments are accepted through T/T, Western Union and Paypal.
4. How do you clean the products?
To wash:
Detach the fabric from the fan/blower.
Spray soiled area with pre-wash remover.
Use non-chlorine bleach.
Set the cycle to gentle cycle on cold with minimal rinsing and one load larger than it actually is (i.e. small load should be set to medium load).


Relevant Products:

Inflatable swimming pool, inflatable water slide, inflatable water games, inflatable water park, water totter, iceberg, seesaw, inflatable banana boat, inflatable flyfish,towable crazy UFO,inflatable paddle boat, etc.

Welcome to send inquiry for more details!
Welcome to visit our factory!

Here have Trippo for your another options, if you like it, please contact us too.

King Inflatable is a manufacturer with a trademark registration who has near 10 years of experience in the inflatable industry. We were founded in 2012 and have about 2000 square meters factory facility. Integrating the research, development, production, and sale, we have the best inflatable toy designers, skilled sewing workers, sealing workers, and uniquely innovative products. We insist on our enterprise core value of "Integrity-based, service-oriented, quality to win, achieve win-win".

Main inflatable in our production line for you, a wide range of choices, like Inflatable water park, Inflatable Bouncer, Inflatable Slide, Inflatable Tent, Advertising Inflatables, Inflatable Water Games, Inflatable Swimming Pool, Inflatable Obstacle, Inflatable Billboard, Inflatable Boats, Inflatable Combo, Inflatable Playland, Inflatable Shape, Inflatable Sky Dancer, Inflatable Sports, Inflatable Water Slide and so on.

Top-quality materials are always applied on our inflatables, all of them are made from the best material suppliers in China - Plato chemical; all of the material meets EN-71 EN14960, SGS, EN71 certification. All the product is inspected by water-proof,fire-resistance,cold-resistant, and pressure-resistance. Also, base on the perfect design, the raw material of our inflatables are cut out by the computerized automatic cutting system which can ensure the perfect shape of each products.

We have collected a team of top designers who are professional in using software like Rhino, Maya, Corel Draw, Keyshot, Photoshop, CAD,3Dmax, etc. We can design and produce any inflatable products to match your needs, your budget, your plan, or your place. All you have to do is catch an idea and we will do the rest for you! We will provide fast delivery, affordable prices, and perfect after-sales services for new and old customers.

	Company Summary
Establish Year:	2012
Location:	Guangzhou , China
Factory Size:	10000㎡ + 3000㎡
Employee Number:	100-200
Main Market :	Europe, North America, Middle-East, Australia, Southeast Asia, The products of King Inflatable have sold to more than 80 Countries and Regions all over the world
Main Products :	Inflatable water park, Inflatable tent, inflatable Slip N Slide, inflatable sport games, inflatable bouncer castle/slides, and advertising inflatables, there are more than 6000 different products from King Inflatable sold to all over the world
Annual Output Value:	USD 3800000.00
Main Machines:	Auto cutting machine:2pcs High-temperature welding machine: 10pcs High frequescy welding machine(25000w):2pcs Digital printing machine:1pc Japanese sewing machine: 25pcs Chinese sewing machine:35pcs Punching machine:2pcs