Motorized Wind Tower Welding Line Rotator with Dual Fine Adjusting

Motorized Wind Tower Welding Line Rotator with Dual Fine Adjusting

1. General Introduction

Wind Tower Production Welding Rotator with Dual Fine Adjusting (Roller Adjusting and Roller-bed Adjusting) is used for wind tower fit-up and welding. This structure can ensure the alignment of both pipes. All the motions are motorized by DC motors and all electric elements are France Schneider make.

2. Main Technical Parameters

3. Characteristics and Performance

• The HGKS series is welding turning rolls adjusted by motorized lead screw. East set consists of one driving turning roll, one idler turning roll and electric system. Distance between two rollers is adjusted by motorized lead screw; Driving turning roll adopts double driving, 2 rollers are driven by 2 motors via 2 reducers; the output speed of 2 motors controlled by one inverter, which can ensure the same linear speed for two driving rollers. Work piece revolves stably;
• its linear speed can meet demands of various welding as manual welding, strip welding and auto SAW etc.
• The upper roller beds of both driving and idle units also can be motorized adjusting. And the driving and idle units can be motorized traveling.
• Two rollers, two motors and reducers are fit on the pedestal of driving frame. Two idler rollers are fit on the bed of idler frame.
• Both power and idler rollers are PU rollers with high rigidity, good wearability and long life.
• For different Dia. of work piece, adjust distance between two rollers by motorized lead screw.
• After putting work piece, make sure the surrounding angle is between 45°～110°.

4. Reference Photos

WUXI GUOHENG MACHINERY CO., LTD is founded in 2003 which has a history of more than ten years in the design, development and manufacturing of offshore&onshore wind tower welding equipment, CNC cutting equipment and H beam/box beam steel structure welding line. GUOHENG has a state-recognized enterprise technology center, and as well as a team of experienced professional and technical personnel of high level, GUOHENG possesses great capability of product research and development and manufacturing.

GUOHENG mainly serves for heavy fabrication, offshore wind tower, onshore wind tower, offshore platform, ship yard, boiler, pressure vessel, bridge pile, petrochemical, oil piping line and steel structure, who not only designs and manufactures Welding and Cutting Equipment, but also provides a complete solution for your Automatic Welding Solution and Production Robotization such as free technical consultation, production planning, layout and products design, installation and commissioning, operation and management, etc.

With the development of industrial 4.0, automatization, informatization and Intellectualization has become more and more important and industrial upgrading is imperative. GUOHENG is facing the challenges actively. We adjusted the production ranges, upgrade all the products in mechanical and control. Moreover, we set up Robot Cutting and Robot Welding Team specially, and build the cooperation with robot manufacturers. Now, we are working with Germany KUKA, Japan FANUC, Sweden ABB, and Japan YASKAWA.

We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always.