

Add to Cart
250℃ High Temperature HEPA Air Filter with SUS304 Frame for Pharmaceutics
Ultra-fine glass fiber media, aluminum foil separator, stainless
steel frame, assembled from a special high temperature-resistance
sealant can use well under high temperature environment at 250~350
℃, the frame material and thickness to provide a variety options of
the frame material and thickness.
Each filter has been strictly tested before factory.
Type: High Temperature absolute filter.
Frame: Galvanized Steel.
Filtering Element: Glass microfiber paper.
Separators: Corrugated aluminum.
Sealant: Silicone for high temperature.
Joint: Silicone.
MPPS Efficiency: 99.95% %
EN 1822 Class: H13.
Recommended Final Pressure Loss: 450 Pa.
Temperature: Up to 250oC in continuous service.
Feature:
1.Wind speed uniformity is good.
2.High temperature resistance (≤350°).
3.Not easily deformed.
4.High dust collection efficiency,high filtration efficiency.
Application:
HEPA filters are extensively used in the terminal filtration of the
civil or industrial cleansing places in the industries such as
electron, semiconductor, precision mechanism, pharmacy, hospital
and food, etc., which require relatively high cleanliness factors.
It is suitable to filtrate for clean.
The 250℃ High Temperature HEPA Air Filter designed to remove
airborne contaminants in critical areas, in which high efficiency
on fine particulate matter is required and where hot air is used
during the production process.
These filters are used in a board range of industries, from the
production of pharmaceutics, photos and films, to food processing.
Components used for the assembly of this filter, were either
specially selected for their heat resistance or because they are
not severely afffected by increased temperature.
Product Specification:
Nominal Size(W*H*D) | Size (mm)(W*H*D) | Pleasts Type | Flanger | Air Flow (m3/h) | Face Velocity | Primary Resistance (pa) | Finally Resistance (Pa) |
12*12*6 | 305x305x150 | Deep AL Foile Pleats | Two side | 234 | 0.9 | >99.97%@0.3um | 2-2.5times primary resistance |
12*24*6 | 305x610x150 | Two side | 510 | 0.9 | |||
24*24*6 | 610x610x150 | Two side | 1080 | 0.9 | |||
30*24*6 | 762x610x292 | Two side | 1320 | 0.9 | |||
12*12*12 | 305x305x292 | Two side | 384 | 1.6 | |||
12*24*12 | 305x610x292 | Two side | 900 | 1.6 | |||
24*24*12 | 610x610x292 | Two side | 1920 | 1.6 | |||
30*24*12 | 762x610x292 | Two side | 2400 | 1.6 |