17AM Thermal Protector Electric Motor Spare Parts Over Temperature Switch

Electrical 17AM thermal protector water pump motor 150 degrees temperature switch

Introduction to 17AM Thermal Protector

The 17AM thermal protector switch is a thermal protection element that uses a special bimetallic reed, a large-capacity contact, a conductive metal shell and a bottom plate to form a control loop. It has the advantages of small size, fast temperature sensing, reliable performance, etc. It can be fully automated in large quantities and is widely used in the field of thermal protection.

The working principle of 17AM thermal protector

When working, the bimetal reed presses the movable contact on the static contact tightly due to the special curved surface, the contact is closed, and the circuit is turned on. When the electrical appliance generates heat due to a fault, and the temperature rises to the rated operating temperature of the thermal protector, the bimetallic element is heated to generate internal stress and quickly act to reverse the arc, driving the moving contact to instantly jump away from the static contact, causing the contact to break Switch on and cut off the power supply to protect against overheating. When the temperature of the protected electrical appliance drops to the product's rated reset temperature value, the bimetallic element returns to the initial state and the movable contact is closed, and the electrical appliance resumes work.

17AM thermal protector feature

The temperature sensing element is made of bimetallic sheet;

Widely used and cost-effective;

No electric heating effect, life is up to 10,000 times,

Fully sealed assembly, waterproof and moisture-proof

It has the dual performance of sensing temperature and current to move

Padded stainless steel housing, suitable for most dipping processes

Wires of various specifications and lengths can be riveted according to customer needs

17AM Thermal Protector Technical Parameters Technical Parameters

17AM Thermal Protector Application

Widely used in various types of motors, transformers, lighting appliances, electric heaters, vacuum cleaners, high-pressure cleaners, submersible pumps, high-pressure water pumps, various electric tools, electric heating pads, heaters and other household appliances, electric heating appliances, Instruments, equipment, new energy batteries, etc.

17AM Thermal Protector Picture show

17AM Thermal Protector Instructions

The product shell is made of metal material, and the shell is live when it is energized. It has been equipped with a high-temperature thermally conductive polyester insulation protective sleeve when it leaves the factory. When installing, check whether the thermal protector is placed in the middle of the insulation sleeve, and the insulation sleeve must not be removed. installation.

Do not knock with sharp objects or hard objects to prevent deformation of the shell during installation. Do not install in a humid environment with a humidity greater than 90% or directly immerse in liquid to avoid accidents due to shell deformation, product failure or shell leakage; installation wiring should Pay attention to the good connection of the lead wire to avoid causing the virtual connection to generate heat and affect the normal operation of the thermal protector.

The actual working voltage and working current of the thermal protector should not be greater than its nominal rated voltage and rated current, and it can be used normally if it is less than its nominal rated voltage and rated current.

Ningbo Nide Machinery Equipment Co., Ltd., was established 2010, committing to provide customers with highly automated, intelligent, and flexible production solutions, and focusing on the production line of stator, rotor and final assembly of various motors.

•A technology-based comprehensive enterprise focusing on motor automation, informatization and intelligent manufacturing;

•In-depth study of the field of new energy drive motor automation equipment;;

•Provide one-stop service for customers;

•Rich experience in designing automated assembly systems, planning and customizing based on individual needs.

Focus on providing one-stop solution to motor manufacturing.

Three business divisions:

1. Motor manufacturing machines.

2. Motor components.

3. Technical consulting and turn-key service.

The Core business is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.

The second division is to supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.

The third division is to provide technical support and consulting, project support and turn-key service for some motor manufacturing.

With good service, unique philosophy, professional team and reliable quality, we win the worldwide customers’ confidence gradually. We directly and indirectly supply our products to more than 50 countries. Among the customers, many of them are the world-renown companies.

Application status

Ningbo Nide Machinery Equipment Co., Ltd., wishes is to provide world wide customers with one-stop service for the motor manufacturing.

Make motor, turn to Nide, everything will be easy !
Nide--Just for easy, our objective is not only to make motor manufacturing easier, but also strike for making life easier.

Five Affiliated Companies

1.Ningbo Nide Mechanical Equipment Co., Ltd-www.nide-group.com

Located at Hi-Tech District in Ningbo city, the industrial hub of China, and taking the advantage of strong technical and commercial team, Ningbo Nide Mechanical equipment Co.,Ltd focuses on the R&D, marketing&sales,quality control and after service of the machines which are produced by its affiliated factories(Jiangsu Nide Automation Tech Co.,Ltd and Jiangsu Xiandian Mechanical Co.,Ltd.

Our wishes are to provide our customers with optimized full pack of solution to motor manufacturing.

2.Jiangsu Nide Automation Tech Co., Ltd

Located in Suzhou, covering the workshop area of 9,000 square meters, with 102 employee, Jiansu Nide Automation-Tech Co., Ltd mainly manufacture stand along machine and fully automatic line for induction motor stator, BLDC motor winding machine, external rotor production machines, rotor assembly line, motor assembly line and other customized machine or production line.

The products are mainly applied for single and three phase induction motor, water pump motor, washing machine motor, air condition motor, fan motor, compress motor, electric bicycle motor, BLDC motor, servo motor, electric automotive motor, etc. some of our products are CE approved.

Strictly implementing the ISO 9001 system, equipped with the high precision machining facility, we ensure our products to meet what customers' exact needs.

3.Zhejiang Nide Intelligent Automation Co.,Ltd--www.nide-ai.com

Zhejiang Nide Intelligent Automation Co.,Ltd, which is wholly-owned by Ningbo Nide Mechanical Equipment Co.,Ltd, sitting in the industrial hub city Ningbo, mainly focus on the winding and assembly technology for all kinds of BLDC motor, including the stone along machine and fully automatic complete line. Meanwhile, we also customize some non-standard machines to cater for clients needs in motor manufacturing field.

Strict quality control system, plus strong technical team allow us to offer the reliable

machines to our customers.

Nide--Just for easy, is try to not only make motor manufacturing easier, customer easier,

but also strike for future life easier !

4.Ningbo Haishu Nide International Co., Ltd--www.nide-international.com

Sitting in the beautiful sea shore city--Ningbo, taking the advantage of advanced industries hub, perfect supply chain and convenient transportation, and integrating professional team with rich motor manufacturing experience , Ningbo Haishu Nide International Co., Ltd focuses on supplying the motor components one stop sourcing platform to our customers.

The products include commutator, ball bearing, shaft, carbon brush, insulation paper, thermal protector, magnet, fan, motor cover and lamination. Apart from these products, we also provide the service for the motor manufacturing technical consultant, project support and turn-key project.

With the decades experience in the motor manufacturing field, we deeply understand what the customer exactly demand, a significant motor components manufacturing net work and strict quality control system allow us to provide our customer with good quality products at reasonable price, our aim is to help customers to reduce the tiresome sourcing tension while acquiring the good quality products.