Length 100mm Diameter 1mm Test Probe D With 1 N Force Scale Display IEC60529

Brand Name:HongCe
Certification:Calibration certificate(cost additional)
Model Number:HT-I04T
Minimum Order Quantity:1 set
Delivery Time:3 days
Payment Terms:T/T
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou Guangdong China
Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou
Supplier`s last login times: within 15 hours
Product Details Company Profile
Product Details

Length 100mm Diameter 1mm - Test Probe D With 1 N Force Scale Display IEC60529


The 1mm test rod meets IEC61032 figure 4 test probe D and EN Standards including IEC60529 for IP4 and suffix D codes. It is used to verify the protection of persons against access to hazardous parts. Also it is used to verify the protection against access with a tool. The handle and stop face are made of nylon. The rod is made of stainless steel, with dynamometer.


Product information:

This probe conforms to the standard requirement of IEC61032 figure 4 test probe D and IEC 62368-1 Figure V.5, IEC 60065:2014 clause 9.1.4, and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.

Customizable: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with force.

Main specification and corresponding technical parameters:


ModelHT-I04T
NameTest rod probe with force
Diameter of the metal wireФ1+0.05 0
Sphere diameterSФ35±0.2
Handle diameterФ10
Probe length100±0.2
Handle length----
ForceWith force of 1N
Applied standardIEC60529

China Length 100mm Diameter 1mm Test Probe D With 1 N Force Scale Display IEC60529 supplier

Length 100mm Diameter 1mm Test Probe D With 1 N Force Scale Display IEC60529

Inquiry Cart 0