Product Details
1000M SFP Full Duplex 2 ports Ethernet Switch 1310nm with 8K MAC
16+2 Management gigabit fibre network switches is a second, four
gigabit managed switch, provides 16 SFP optical ports and 2 RJ45
ports. Support the L2 of wire-speed switching hardware. You can
form through the Ethernet port on the switch to WEB to set various
functions. Built-in ARP and DOS defense system, effective defense
ARP, DOS and a variety of variants of viruses, in addition this
switch also equipped with many powerful features: a comprehensive
QoS, Spanning Tree, a variety of storm suppression, Bandwidth
Control, IGMP Snooping , ACL Access Control, DHCP Snooping and so
on. Very suitable for small and medium enterprises, campus networks
and metropolitan area network aggregation applications.
Key Features :
- ARP Defense: MAC address and MAC address port security binding
function and filtering function can be an effective defense ARP
attack; DHCP Snooping can obtain the MAC address to the dynamic ARP
protection for users.
- QoS: Support multiple QOS policy, based on 802.1p priority settings
for each port provides 8 priority queues; IP-DSCP to IP header
according to different service level classification to achieve a
comprehensive QOS; AUTO VOIP function Set the port to the highest
priority voice signals, greatly improve the network IP telephony
voice quality.
- Spanning Tree: Support IEEE 802.1d, IEEE 802.1w (Rapid Spanning
Tree Protocol) and IEEE 802.1s (Multiple Spanning Tree Protocol)
standard.
- AUTO DOS: Can the following seven different forms of DOS attacks
for defense
- Storm suppression: Can broadcast, multicast, DLF to set the flow.
- ACL Access Control: Used to control the port and out of the packet
to ensure that certain sites within the network will not be without
access to authorized users, while indirectly played a defense ARP
attack capabilities.
- IGMP Snooping: Support IGMP: Version 2 (RFC 2236): IGMP Snooping is
used to overflow when the multicast packet network, the
establishment of a multicast group to forward multicast packets to
avoid the waste of bandwidth.
- Support 802.1x authentication, provide users with access to
certification.
- Wire-speed filtering - Storage - forward mode, providing true
non-blocking switching fabric.
- Support port mirroring, port trunking, port speed limit function.
- Support Port-based VLAN and based IEEE802.1Q the VLAN.
Specifications:
Product Type | 16+2 Management gigabit fibre network switches |
Support agreement | IEEE802.3,IEEE802.3u,IEEE 802.3ab,IEEE 802.3x,IEEE802.1q, IEEE802.1p,IEEE802.1z,IEEE802.1d,IEEE802.1s,IEEE802.1w,IEEE802.1ax, IEEE802.1ak |
Maximum Fram elength | 9216B |
Ports | 16 SFP optical ports and 2 RJ45 ports |
Network Media | 1000Base-LX: using long wavelength laser (1310nm) over multimode and single mode fiber, multimode fiber the maximum distance is
550m, single mode 10-24km. |
1000Base-SX: 62.5μm multimode fiber the maximum transmission
distance of 275m, 50μm multimode fiber using the maximum transmission
distance of 550 meters. |
10Base-T: 3 classes or more than 3 kinds UTP; (maximum transmission distance of 200m), 14880P / S |
100Base-TX: 5 Category UTP; (maximum transmission distance of
100m), 148800P / S |
1000Base-T: CAT-5E UTP or Category 6 UTP; (maximum transmission distance of 100m), 1488000P / S |
VLAN Address Table | 4K |
MAC address table | 8K |
Cache | 32Mbits |
Backplane bandwidth | 52Gbit |
Filtering and forwarding rate | 10Mbps:14880pps |
100Mbps:148800pps |
1000Mbps:1488000pps |
Dimensions | 440x230x44mm(1U19-inch standard chassis) |
Use of the environment | Operating Temperature: 0℃~40℃; Humidity 10% ~ 90% non-condensing |
Storage temperature: -20℃~70℃ ; Storage Humidity 5% ~ 90% non-condensing |
Power | Input :90-264VAC ,50-60HZ; output: 5V/12A |
Power consumption | Power consumption: 60W |
Ordering information:
P/N | Description |
FR-SW16GF2GTM-SFP | 16-Port 1000Base-Fx Managed Fiber Switch with 2-Port Giga RJ45 Slot |
Company Profile
FiberRoad founded in 2005, is committed to developing and manufacturing and
selling network communication products. In particular, the focus on
fiber optical technologies, Ethernet technologies and the
integration of broadband access technologies. With leading-edge
technology and high quality service as the driving force, FiberRoad continued steady growth, and become a top global equipment
supplier of innovative last-mile access in the telecommunications
market.
Products and Market
FiberRoad products include a broad line of FTTH,Fiber Media Conversion
platform, Manageable media converters, Fiber Switch, SFP
transceivers, components and subsystems,. CWDM/DWDM system ,
Passive products, In addition, we supply analogous products to
telecom fixed wavelength, data communications and cable TV markets.
As our professional engineering team have devoted ourselves to the
R&D for a long time, so that the products have been quiet
mature. We have received much popular recognition from our current
Telecom operators, Telecom engineering contractors, and Solution
Partners in the world. This alliance covers Europe, Asia, the
Middle East, Africa, plus North and South America. This global
partnership receives direct engineering and technical support from
our company headquarters in Shenzhen.
As services such as voice and multimedia are moving to IP based
technologies, carriers have found that their core networks can be
operated more effectively and economically if the public switching
networks are migrated to a next generation IP based networks. This
proactive thinking will allow FiberRoad to continue developing IP Camera solutions for today and
tomorrow's markets.