Guardrail Steel 15KW 3 Roller Plate Bending Machine
Brand Name:CMC
Minimum Order Quantity:1 set
Place of Origin:WUXI,CHINA
Price:Negotiate
Packaging Details:Nude
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
No.288 #, Hubin bei RD, Zhoutie Town, Yixing, Wuxi City,PR.China
Supplier`s last login times:
within 29 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Guardrail plate bending machine
The equipment frame is processed by A3 steel plate, after aging
treatment, 3-roller structure, 1 upper and 2 lower, the lower
roller adopts a fixed structure, the upper roller adopts slider
movement adjustment, and 3 sets of turbine box drive are driven by
the motor to adjust the upper and lower The turbine box is
connected by a connecting rod to ensure the synchronization of 3
sets of boxes, and the 3 independent wall plates are connected by a
shaft to ensure the parallelism of the whole machine. The diameter
of the roller shaft is 110mm. There are two sets of molds on the
left and right, one for the inner arc and one for the outer arc,
and a set of 15KW main motor. It is driven by a ZQ500 reducer,
which drives the left and right lower shafts through gears.The gear
module is 10m, one for each left and right.The product is processed
through the operation console.
a. Thickness : 2.5--4mm (±0.2mm) , Width: 750mm±5mm,
b.Yield strength is 235Mpa, side bend less than 10mm( base on 5mm),
c.Coil Inner-diameter:φ508～φ600mm; Coil Inner-diameter: ≤φ1800mm,
d.Coil weight: ≤10T
I.Basic machine parameters
- Mechanical properties and specifications of raw materials
- Material: Q345B galvanized sheet
- Thickness: 2.5～3.0mm
- Width: 450-476mm
- Weight: 65KG
- Specifications of products
- Product: by product drawing
- Product width: 310mm ± 5mm
- Product height: 81mm ± 5mm
- Product specifications
- Forming method: Cold roll forming
- Production speed: ≤10m / min
- Feeding direction: left feed
- Main voltage: 380V, 50Hz
- Unit total power: about 20.7KW
- Drive shaft bearing: 6026
- Turbo lift: SWL10-3 / 23-FU3
- Main drive motor: YVP180M-4-15
- Reducer: ZQ500-48.57
- Wallboard material: A3
- Shaft material: 40
- Mold material: Gcr15
II,Overview of equipment structure
The equipment frame is processed by A3 steel plate, after aging treatment, 3-roller structure, 1 upper and 2 lower, the lower roller adopts a fixed structure, the upper roller adopts slider movement adjustment, and 3 sets of turbine box drive are driven by the motor to adjust the upper and lower The turbine box is connected by a connecting rod to ensure the synchronization of 3 sets of boxes, and the 3 independent wall plates are connected by a shaft to ensure the parallelism of the whole machine. The diameter of the roller shaft is 110mm. There are two sets of molds on the left and right, one for the inner arc and one for the outer arc, and a set of 15KW main motor. It is driven by a ZQ500 reducer, which drives the left and right lower shafts through gears.The gear module is 10m, one for each left and right.The product is processed through the operation console.
III,Equipment configuration checklist
| No | Part Name | Quantity |
| 1 | Forming mould | One set of molds on each side |
| 2 | 15KW drive motor | 1Set |
| 3 | Forming mold shaft | 3Sets |
| 4 | Turbo lift | 3Sets |
| 5 | Lifting drive motor | 1Set |
| 6 | ZQ500 reducer | 1Set |
| 7 | Electrical console | 1Set |
| 8 | Equipment anchor bolt | 1Set |
Guardrail Steel 15KW 3 Roller Plate Bending Machine
Inquiry Cart
0