Product Details
34CrNiMo6+QT Alloy Steel Bar DIN 1.6582 Alloy Structure Steel Rod
OD 55mm 6M Length
34CrNiMo6 Steel is a typical high-strength alloy structural steel
in the European standard. As a medium carbon alloy steel containing
Molybdenum, Chromium and Nickel,it is considered to be one of the
most popular steels in Europe.
In the quenched and tempered condition, the performance
characteristics of 34CrNiMo6 steel can be maximized,that is, High
Strength, High Toughness and Good Hardenability.This is why you
will find this type of steel often used in high strength
requirements in European countries.
Due to its excellent comprehensive mechanical properties,34CrNiMo6
steel is widely used in the manufacture of important parts such as
train axles, mechanical main shaft parts, wind power shafts, engine
camshafts and connecting rods,etc.
34CRNIMO6 STEEL CHEMICAL COMPOSITION
Standard | Grade | C | Si | Mn | P | S | Cr | Mo | Ni |
EN 10083 |
34CrNiMo6 /DIN 1.6582 | 0.30-0.38 | ≤0.4 | 0.5-0.8 | ≤0.025 | ≤0.035 | 1.3-1.7 | 0.15-0.30 | 1.3-1.7 |
EN 10250 | 0.30-0.38 | ≤0.4 | 0.5-0.8 | ≤0.035 | ≤0.035 | 1.3-1.7 | 0.15-0.30 | 1.3-1.7 |
SEW 550 | 0.30-0.38 | ≤0.4 | 0.4-0.7 | ≤0.035 | ≤0.035 | 1.4-1.7 | 0.15-0.30 | 1.4-1.7 |
DIN 17200 | 0.30-0.38 | ≤0.4 | 0.4-0.7 | ≤0.035 | ≤0.03 | 1.4-1.7 | 0.15-0.30 | 1.4-1.7 |
34CRNIMO6 STEEL PRODUCTION PROCRSS
- 34CrNiMo6 Steel Heat Treatment Production Line
Automatic intermediate frequency quenching production line
- Equipped with 5 automated production lines
- Heat treatment diameter: Dia14-130mm
- Length limit: 3,000-9,000mm
- Automatic straightening machine
Conventional quenching and tempering production line
- Equipped with Box type trolley furnaces
- Loading limit:30 tons
- Length limit: below 13,000mm
- 1000 tons Straightening machine
- 34CrNiMo6 Steel Machining
- 34CrNiMo6 Steel Dimensional inspection
- 34CrNiMo6 Steel Hardness check
- 34CrNiMo6 Steel Mechanical property testing
34CrNiMo6 Steel Mechanical property
Size(mm) | Rm(Mpa) | Rel(Mpa) | A5(%) | Z(%) | Aku(J) |
Φ60 | 1150 | 1060 | 17 | 62 | 92 |
Φ200 | 930 | 825 | 21 | 56 | 85 |
Φ350 | 900 | 780 | 17 | 62 | 100 |
Φ430 | 825 | 650 | 17 | 55 | 86 |
Φ575 | 785 | 590 | 20 | 50 | 80 |
Remark:The above data is the real test data of the laboratory, for
your reference only
- Automatic Flaw Detection System
14-Channels Ultrasonic Testing
- Four probes in 4 Channels:Detecting longitudinal cracks inside and
outside the bar in two directions
- Six probes in 6 Channels:Detecting transverse cracks inside and
outside the bars
- Four probes in 4 Channels:Detecting internal defects in the bars
3-Channels Eddy Current Testing
Detection method of probe rotation,Detecting surface and near
surface defects.
Detection diameter:Ф17mm~Ф80mm
Detection length:3-9m
Straightness:≤1.5mm/m
Detect applicable materials:High strength steel,Carbon tool
steel,Carbon structural steel,Alloy structural steel,Tool
steel,Spring steel,Bearing steel,High-speed steel,Stainless steel
Defect detection capability
The following comparative defects can be detected in the online
state.
Center cross hole:Ф0.8x15mm
2mm horizontal hole under the skin:Ф0.5×12.7mm
Surface groove:depth x width x length 0.1×0.1x10mm
Company Profile
Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a
beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL)
,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy
excellent geographic location and convenient water, land and air
transportation. , Wuxi become the biggest stainless steel sheet
,plate and coil supply Centers in China. Jiangsu Mittel Steel
Industrial Limited was established in 1998 years. as one of the
largest stockists and manufacturers of industrial grade Stainless
Steel products and derivatives in Wuxi ,We keep a stock of 50000
tons every month, so we can delivery goods in fast time.
Our company supplies cold/hot-rolled stainless steel
sheets,stainless steel coils and stainless steel Plate to many
steel factories from athome and abroad, including Shanxi Taigang
Iron& Steel CO, . Ltd (TISCO)Zhangjiagang Pohang (ZPSS),
Shanghai BAO STEEL, Ningbo Baoxin and steel factories in Taiwan
area, Mainland Chinese and foreign countries and regions.
Our long-term business lines are
201.202.304(1.4301).304L.316.316L(1.4404).430.409L, 309S
,310S(1.4845).317L.904L.S31803(1.4462).S32750.S32760, Finish: 2B,
BA, NO. 1 NO. 4, HL, 8K and so on...Meanwhile, our company is also
engaged in the long-term supply of homemade & imported medium
and thick plates, galvanized and carbon steel products.
Adhering to the principle of "quality first and customer
foremost",our company will offer long-term service to nationwide
manufacturers of household appliances, elevators, tableware,
ornaments, tanks and machines. We can offer precise frosted
wiredrawing, 8K mirror finishing and skim board oil-abrasion of
various specifications at any time. The precisely-processed
products will meet your requirements for high quality. Our company
is a modern enterprise integrating distribution and storage.
If you are interested in any of our products or would like to
discuss a custom order, please feel free to contact us. We are
looking forward to forming successful business relationships with
new clients around the world in the near future.