S21800 Stainless Steel Bar OD75mm ASTM A276 AMS5848 Nitronic60 Round Bar

Product Description

Compared to cobalt alloys and high nickel materials, Nitronic60 is a low cost wear and abrasion resistant material. Its corrosion resistance is better than 304 stainless steel, chloride chloride resistance is better than 316 stainless steel, room temperature yield strength is 304 and 316 twice. At the same time Nitronic60 has a good high temperature oxidation resistance and low temperature impact resistance.

Application
Thanks to the excellent wear and abrasion resistance of the Nitronic 60 at room temperature and temperature, it is widely used in stem, seat, spool, nut, bolt, screen, chain drive, latch, gasket, rolling bearing, pump zero Components, including wear rings and rotors.

chemical component%

Corrosion resistance
Nitronic60 corrosion resistance between 304 and 316, but the practice has proved that in a friction system, the first appeared in the abrasion wear, resulting in dimensional changes, and then corrosion. So the design engineer is the primary consideration is the wear and tear. Although the Nitronic 60 is less resistant to corrosion than 316, Nitronic 60 has better resistance to chloride pitting, stress corrosion cracking and pore corrosion under laboratory conditions.

Processing performance

Due to the metallographic characteristics of Nitronic 60, the material is not easy to process. It is recommended to use coated carbide inserts. Nitronic60's turning speed is about half of the 304 material.
Single point turning
Rough car - depth 0.15 ": 0.015" / rev feed-175SFM
Precision Train - Depth 0.025 ": 0.007" / revfeed-200SFM
drilling
Diameter 1/4 "hole: 0.004" / rev feed-60SFM
Diameter 1/2 "hole: 0.007" / rev feed-60SFM
Diameter 3/4 "hole: 0.010" / rev feed-60SFM
Reaming
With drilling -100SFM
The above parameters correspond to carbide tools.

Product Display

Other Products

stainless steel sheet /plate /coil/ pipe/tube/bar/rod/square bar. etc

galvanized steel sheet /plate /coil /pipe/tube/bar/rod/square bar. etc

Company Information

We are an company specialize in stainless steel products for 23 years, which located in Wuxi City ,China ,near Shanghai Port. After years of accumulation and concentration ,we have rich experience in stainless steel and galvanized sheet/plate/coil/pipe/tube/bar. etc. In addition, our researchers have developed special stainless steel for specific use in some extremely harsh working environment. We has advantages in providing products stably and timely . Also, large quantity is with preferential treatment. We sincerely welcome you to visit our factory if you have interest, if we have this kind of luck ,we will do what we can do best.

Our Certification

Our Main Market

Our Service

Cutting & Surface Treatment as your requirement

The reasons why you will choose us

• High quality & Reasonable price
• More than 200 patterns for your choice
• Large storage company & quantity in stock
• Quantity is with preferential treatment
• Stable supply
• Customization in size
• Cutting service according to your requirement
• Good after-sale service

Any questions, please feel free to contact us, we provide 24-hour service.

Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transportation. , Wuxi become the biggest stainless steel sheet ,plate and coil supply Centers in China. Jiangsu Mittel Steel Industrial Limited was established in 1998 years. as one of the largest stockists and manufacturers of industrial grade Stainless Steel products and derivatives in Wuxi ,We keep a stock of 50000 tons every month, so we can delivery goods in fast time.

Our company supplies cold/hot-rolled stainless steel sheets,stainless steel coils and stainless steel Plate to many steel factories from athome and abroad, including Shanxi Taigang Iron& Steel CO, . Ltd (TISCO)Zhangjiagang Pohang (ZPSS), Shanghai BAO STEEL, Ningbo Baoxin and steel factories in Taiwan area, Mainland Chinese and foreign countries and regions.

Our long-term business lines are 201.202.304(1.4301).304L.316.316L(1.4404).430.409L, 309S ,310S(1.4845).317L.904L.S31803(1.4462).S32750.S32760, Finish: 2B, BA, NO. 1 NO. 4, HL, 8K and so on...Meanwhile, our company is also engaged in the long-term supply of homemade & imported medium and thick plates, galvanized and carbon steel products.

Adhering to the principle of "quality first and customer foremost",our company will offer long-term service to nationwide manufacturers of household appliances, elevators, tableware, ornaments, tanks and machines. We can offer precise frosted wiredrawing, 8K mirror finishing and skim board oil-abrasion of various specifications at any time. The precisely-processed products will meet your requirements for high quality. Our company is a modern enterprise integrating distribution and storage.

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.