Servo High Speed Barrier Gate 3m Carbon Fiber Arm With 0.5s Opening Closing Time

Servo High Speed Barrier Gate 3m Carbon Fiber Arm With 0.5s

1. Product Overview

2. Product Application

3. Product Parameters

• Power Supply: AC110V/220V
• Rated Power: 750W
• Motor: 750W AC Servo Motor with a no-load rotational speed of 5000r/min
• Operating Temperature: -35°C to +65°C
• Relative Humidity: ≥90%
• Remote Control Distance: ≤100m (in open and sunny weather)
• Protection Level: IP54
• Maximum Arm Length: 6m
• Product Dimensions: 292mm × 368mm × 940mm
• Driving Mode: AC Servo Motor

4. Key Features

• Adjustable Operation: The operation speed, slow up and slow down, and limit position are all adjustable, allowing for customization according to specific site requirements.
• Flexible Direction: The left and right directions can be quickly interchanged, facilitating installation and adaptation to different traffic layouts.
• Power Failure Backup: The barrier arm can be manually operated in case of power failure, and there is an automatic barrier arm lifting function during power outages, ensuring continuous operation.
• Advanced Anti-interference: With the 418 frequency learning function, it effectively prevents the duplication of remote controllers and offers strong anti-interference capabilities.
• Comprehensive Detection: It has multiple input functions, including infrared photocell sensor, vehicle loop detector, radar, etc., for enhanced safety and accurate vehicle detection.
• Output Functions: It provides various output functions such as LED light, traffic light, and signal output for in-place, normally open, and normally closed status, enabling seamless integration with other systems.

5. Installation and Maintenance

• Installation: The installation process involves pouring a concrete base approximately 150mm larger than the gate dimensions with a thickness of about 200mm. Expansion bolts (M16*200) are used to secure the barrier gate, and the barrier arm is carefully installed by aligning and tightening the screws.
• Maintenance: Regular maintenance is crucial for optimal performance. The surface of the box should be cleaned frequently to remove dust and debris. Fasteners should be checked every three months and tightened if loose. Professionals should examine the wear condition of easily worn parts every six months and replace them promptly. In case of a short remote control distance, check for metal shielding or low battery, considering the influence of weather conditions.

6. Fault Diagnosis and Solution

7. Contact Information

• Contact Person: Zoe Lee
• Mobile: +86 135 3781 8437
• Email: zoe@wonsunbarrier.com
• Wechat: Zoelee0315
• WhatsApp: +86 135 3781 8437
• Company Name: Shenzhen Wonsun Machinery & Electrical Technology Co., Ltd
• Address: 1st Floor, Zhigu, No. 2 - 10, South Jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China. (Postal Code: 518118)