LED Light Housing DC24V Brushless Motor Automatic Barrier Gate with 6th BLDC Motor

Automatic Barrier Gate Features:

1. Operation speed can be adjusted.
2. Slow up and slow down can be adjusted.
3. The limit angle can be adjusted.
4. Left and right direction can be quickly interchanged.
5. The barrier arm can be manually operated in case of power failure.
6. 418 frequency learning code anti-copy remote controller.
7. Infrared photocell sensor lO signal input function.
8. Loop detector and radar IO signal anti-collision signal input function.
9. Up, down and stop IO signal input function.

2. Technical specifications:

1. Operating temperature: -30°C to +60°C

2. Rated voltage: DC24V

3. Operating speed: 1.5 s to 8 s

4. Rated current: 9.5A

5. Rated power: 100W

6. No-load speed: 1850rpm

7. Rated speed: 1400rpm

8. Protection level: IP54

9. Maximum arm length: 6m

3. Safety Features:

1. Advanced electromechanical integration hoisting design concept: compact structure, quick assembly, and easy maintenance.
2. Advanced mold production concept: high precision, strong consistency, fast production efficiency, and guaranteed quality.
3. The design concept of the advanced two-stage gear and worm gear variable speed transmission: high precision, long life,
gate opening by manually when power off. It has many advantages such as no blockage, no oil leakage, high torque, low noise,
and can operate normally at minus 35 degrees.
4. Advanced brushless motor design concept: low power consumption, high efficiency, no heat generation, wide speed regulation range,
making the barrier gate rise and fall quickly and smoothly.

Barrier Housing Installation

1) Pouring the Base:

Determine the desired position for the barrier gate and pour a concrete base. The base dimensions should be approximately 150mm larger than the dimensions of the barrier gate, the thickness about 200mm.

2) Securing the Barrier Gate:

Drill holes at the predetermined positions and insert expansion bolts (M16*200). Place the control box in position and secure it firmly.

Debugging

After the complete assembly of the barrier gate, check that all components are properly aligned and securely fitted. Use the handwheel at the rear of the motor to perform a test UP and DOWN of the barrier arm. After confirming that everything is correct, power on for testing and adjust the barrier arm to ensure it is level.