

Add to Cart
6th BLDC Motor DC24V Brushless Motor Vehicle Barrier Gate 1.5s-6s
Adjustable
1. Operating temperature: -30°C to +60°C
2. Rated voltage: DC24V
3. Operating speed: 1.5 s to 8 s
4. Rated current: 9.5A
5. Rated power: 100W
6. No-load speed: 1850rpm
7. Rated speed: 1400rpm
8. Rated torque: 59.6N. m
9. Relative humidity: ≥85%
10. Remote control range: ≤50 meters (clear, sunny weather)
11. Protection level: IP54
12. Maximum arm length: 6m
1. Advanced electromechanical integration hoisting design concept:
compact structure, quick assembly, and easy maintenance.
2. Advanced mold production concept: high precision, strong
consistency, fast production efficiency, and guaranteed quality.
3. The design concept of the advanced two-stage gear and worm gear
variable speed transmission: high precision, long life,
gate opening by manually when power off. It has many advantages
such as no blockage, no oil leakage, high torque, low noise,
and can operate normally at minus 35 degrees.
4. Advanced brushless motor design concept: low power consumption,
high efficiency, no heat generation, wide speed regulation range,
making the barrier gate rise and fall quickly and smoothly.
5. Advanced Hall limit design concept: automatic full-automatic
limit detection without debugging, high precision, and real-time
detection of
the motor's constant force operation speed, making the barrier gate
rise and fall more smoothly.
6. New arc-shaped three-link structure design concept, anti-sagging
rod and anti-lifting rod balance adjustment is convenient, balance
level
adjustment is simple, and anti-lifting rod is better.
7. Advanced brushless gate-specific controller: powerful integrated
chip drive, fast processing speed, large memory, good control
effect,
powerful function, high degree of automation, durable; using low
voltage 24V power supply, suitable for global voltage, safe and
reliable.
4.The parameter for selecting the spring
Arm type | Arm length | Use of spring | |
Type | Dimension(Wire Diameter*Length) | ||
100*45 Straight arm | 6m | Tension spring | 4.5+5.5 |
5m | 4.0+5.5 | ||
4.5m | 4.5+4.5 | ||
4m | 4.5+4.0 | ||
3.5m | 4.5 | ||
3m | 4.5 | ||
80*45Straight arm | 6m | 5.5+4.0 | |
5m | 5.5+4.0 | ||
4.5m | 4.5+4.5 | ||
4m | 4.5+4.0 | ||
3.5m | 4.5 | ||
3m | 4.0 | ||
Two fence arm | 4.5m | 5.5+5.5 | |
4m | 4.5+5.5 | ||
3.5m | 4.5+4.5 | ||
3m | 4.5+4.5 | ||
90 degree arm | 5m | 5.5+4.5 | |
4.5m | 5.5+4.5 | ||
4m | 4.5+4.5 | ||
3.5m | 4.5+4.5 | ||
3m | 4.5+4.0 | ||
Three fence arm | 4.5m | 5.5+6.8 | |
4m | 5.5+5.5 | ||
3.5m | 4.5+5.5 | ||
3m | 4.5+4.5 | ||
Remark:6.8 yellow,5.5 blue,4.5 red,4.0 green |
Error Codes:
EFF-01: Hall Fault | Check the motor or wiring. | This is usually due to the motor or motor wiring not |
EFF-02: Undervoltage Fault | Voltage is below 22.0V. | This could be due to insufficient voltage from the |
EFF-03: Overcurrent Protection | Heavy load or damaged driver board, incorrect motor wiring. | Check if the motor wiring is properly connected and |
EFF-04: Stall Protection | The limit has not been reached after 5 continuous attempts. | Reset the limit points or check if there is an issue |
Wonsun is a professional manufaturer for barrier gate, boom
barrier, sliding gate motor. If any interest, please contact me
freely.
Email: keira@wonsunbarrier.com
Skype: zimin1314
Whatsapp: +86 185 0748 1610
Wechat: Keira_Xia
Intearking Barrier Gate 6m Arm with DC24V Brushless Motor For
Parking lot SYSTEM