Corresponding

PWM duty cycle 25%-95%, step size is 1

Corresponding PWM

duty cycle 25%-95%, step size is 1

Open in place

decelerate angle

The larger the angle

value, the less likely it is to shake the arm when

it is in place.

Close in place

decelerate angle

The larger the angle value,

the less likely it is to shake the arm when it is in place.

Auto reverse force

adjustment

step size is 100；0 is not closing automatically,

Other value will be closing automatically;

This parameter is for the situation that there

is no loop detector signals and non-automatic operation

occasions

Self-check speed

adjustment

Corresponding PWM duty cycle 10%-50%, step

size is 1

0:no operate automatically；1:

operate automatically, eliminate after power off；

2:operate automatically,Power failure memory.

3.intelligent automatically operation.

Motor deceleration

time when paused

The larger the setting, the longer the pause time

will take

Energy saving closing

arm direction

0:invalid
1:close arm valid(energy saving voltage is

determined

by 49 items )
2:open arm valid

0:9600,1:19200,2:38400；Change the

parameter and will be valid after power on again.

Whether to self-check

when power on

0:no self-check,1:self-check；2:self-check with

remote control;

0:Manually invalid,1:Keyboard SET button,

2:remote control valid,3,Keyboard SET button

and remote

control both valid