Remote Control Galvanized Plate Car Park Barriers For Parking Lot System

Brand Name:WONSUN
Certification:CE, ISO, SGS
Model Number:WSTP-125
Minimum Order Quantity:1PC
Delivery Time:3-7 working days after received your payment
Payment Terms:T/T,Western Union,Money Gram, Trade Assurance,Paypal etc.,
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Supplier`s last login times: within 25 hours
Product Details Company Profile
Product Details

Malaysia Remote Control Car Park Barriers For Parking Lot System



WONSUN SUMMER PROMOTION: BUY 20 SETS, GET 1 FOR FREE

IF INTEREST, PLEASE CONTACT ME FREELY!

SKYPE: zimin1314

Whatsapp: +86 18507481610


Technical data:


1) Beam length: <=6m

2) Opening (Closing) time: 1s, 1.8s,3s, 6s

3) Center height: 0.83m

4) Machine core working temperature: -40 degrees to +75 degrees

5) Electric working temperature: -20 degrees to +75 degrees

6) Rated voltage: AC 220V (10%) 50Hz/60Hz, 110V (10%) 50Hz/60Hz

7) Rated power: 120W

8) Relative humidity: <=90%

9) Remote control distance: >=30m

10) Net weight: 55KGS


Car Park barrier functions & features:

Features:
Integrative machine core: all part is made by mold, so all parts can be more accurate. And so the
barrier gate can be much more stable;
.Left or right installed can be amendable. Customer can amend install direction by himself;
.Accurate link mechanism: link mechanism can release arm’s shake and motor load, so the
barrier gate can move more stable and barrier gate’s working life can be more longer;
.70W turbine worm transmission deceleration induction motor: Drive Steady, Noise Lower,
Structures Compact, can realize self-locking.
Functions:
1) Manual release
2) Machine core with compression spring, effectively avoids the accidents caused by spring breaking
3) Die-casting aluminum alloy motor, precision and good at thermal radiating
4) Motor cooling fan, solving the problem of heat-protection
5) Double safety limit switches (photocell electrical limit switch/motor memory sensor)
6) Reversing on obstacle
7) Auto-closing
8) Support the INFRARER PHTOCELL for anti-bumping function (optional)
9) Support the external and internal VEHICLE LOOP DETECTOR (optional)
10) Traffic light interface
11) Wire control (switch signal)/ Remote control (418MHZ)
12) RS485 communication module (optional)


Parking list:

Itemsquantityitemsquantity
Paint-coated case1motor1
Transmission1limit switch1
Barrier arm1capacitor1
Spring1circuit board1
Remote control device2console control device1
Installation kit1

1. Strong carton case with cushion for safety, air bubble film inside for protect ing the

apperance from damaging.

2. As for wooden crate packing, it is USD$ 10/ps; for wooden case packing, it is USD$ 32/ps.

3. As for shipping, we can send you the goods by air, sea and express, which according to your

detail requirements.



FAQ:


1. When barrier finish closing, why does the arm open itself slowly?

  • the spring is too tight, you need release the spring a little, then test it again.
  • see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
  • reset the balance position and the electrical limit switch.

2. Why does the controller panel operate with "Di Di Di" abnormal noises?

  • As for this, it means the resistance on controller board is broken, if you have professional tools to check,
  • then replace that broken resistance, if not, replace that controller panel.

3. Why does the barrier finish half operation of opening and closing?

  • If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.

4. When barrier closed, why is there a 5 degree angle of inclination?

  • the model is not good, and the gear doesn't fit each other tightly.
  • the barrier didn't adjust well, need to reset.

5. When barrier finish open, but it closes itself without any order control, what's the problem?

  • To check the loop cable first, because the loop cable maybe brokem
  • To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.

6. Why does the arm wave a lot when opening and closing?

  • The spring is very tight
  • The Screw touches the rubber absorption tightly, need to reset again.

7. Rubber linning installation suggestion:

  • It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
  • The place with many vehicles come and go, like shopping center, carpark area.

8. Can you accept OEM/ODM order?

  • Absolutely, we are manufacturer of barrier gate, with 7 years researching and developing experience.

Delivery information:



China Remote Control Galvanized Plate Car Park Barriers For Parking Lot System supplier

Remote Control Galvanized Plate Car Park Barriers For Parking Lot System

Inquiry Cart 0