Product Details
220V Constant Temperature And Humidity Chambers,PCL Control
Environment Chamber
Product Features
1. Freezer imported by the French original armored warrior
compressor and use environmental-friendly refrigerant (R134a,
R404a, R23).
9. Frozen system uses units or low-temperature dual-loop system
design.
2. Use more powerful wing-blower air supply cycle, to avoid any
dead end, temperature and humidity are evenly distributed in the
test region.
3. Wind-road cycle adopted the design of blowing side wind and
return wind. Wind pressure and wind speed are in accord with test
standards, and make the door instantaneous temperature and humidity
open that is stabilized time soon.
4. Heating, cooling, humidification and dehumidification system is
totally unaided to improve efficiency, reduce testing cost,
increase life expectancy and lower failure rate.
Specification
Model | HD-150T |
System | Balanced Temperature & Humidity Control System |
Temp. range | -70°C~150°C |
Humid. range | 20 ~ 98 percent R.H. |
Temp. & Humid. accuracy | ± 0.3°C; ± 2 percent R.H |
Temp. & Humid. regularity | ± 2°C; ± 5 percent RH |
Resolution | 0.1°C, 1 percent, P.I.D control |
Heating up | -40°C ~ +100°C within 45 min |
Heating down | 20°C~ -20°Cwithin 40min |
Interior dimension(W×D×H) | 50×60×50cm |
Exterior dimension(W×D×H) | 95x150x105cm |
Interior material | Stainless steel plate(SUS304) |
Exterior material | Stainless steel plate(SUS304) |
Insulation | Rigid foam |
Refrigeration system | Air cooled, Hermetic compressor, single stage refrigeration system. |
Display | LCD |
Safety devices | No fuse breaker refrigerator over load relay, Refrigeration High
pressure Switch, Over Temp, Protector, Protection relay, Protection
fuse, Water Lever protector, Overheat protector, Alarm |
Accessories | Viewing window, Shelves (freely adjustable 2 pcs.), Cable
port(Ø50mm)Chamber lamp. |
Weight | Approx. 250 kg |
Power | AC220V±10 percent 50/60Hz |
About Haida
Haida products are widely used in paper products, packaging, ink
printing, adhesive tapes, bags, footwear, leather products,
environment, toys, baby products, hardware, electronic products,
plastic products, rubber products and other industries, and are
applicable to all scientific research units, quality inspection
institutions and academic fields. Our products meet UL, ASTM, JIS,
GB,SO, TAPPI, EN, DIN, BS and other domestic and international
standards.
Company Profile
Haida established in 2004 in Dongguan City, where is the “silicon
valley” of world manufacturing industry. It is a certified national
high-tech enterprise engaged in design, research and development,
production, sales, calibration and after-sale service of test
equipment, such as paper&packaging test equipment, Furniture
test equipment, material mechanics test equipment, optical
measurement equipment, environmental reliability testing equipment
etc. With the persistent efforts of all staff, Haida owned 4
factories with total 60,000 square meters, 15 branch offices covers
South China, North China, East China, Central China and Northwest
China, as well over 20 overseas after-sales service sites covers
Southeast Asia, Europe, North America and the Middle East with over
28,000 customers.


Haida main business scope includes equipment production, non-standard
equipment customization, software development, measurement and
maintenance consulting services. The company has passed ISO9000
certification and multiple certifications by internationally
renowned testing organizations such as BV, SGS, TUV, and its
products comply with GB, ISO, ASTM, EN, JIS, TAPPI, ISTA, DIN, BS
and other domestic and foreign standards. Meanwhile, invested a
large amount of research and development funds to adhere to the
product concept of R & D , sales and products reserve to walk at
the forefront of the industry. Moreover Haida participated in
composing of furniture test standards and commonly drew up
CY/T229-2020 industry standards with the National quality
inspection, jointly developed industry test equipment with the
National Paper Products Center and Dongguan Quality Testing
Furniture Laboratory, co-built the reliability laboratory with many
well-known enterprises, and Jointly built the dangerous articles
packaging laboratory with Guangdong Huangpu Customs Technology
Center.

Haida adheres to the vision of "To be the World Class Testing Equipment
enterprise" and attaches importance to platform construction and
talent reserves. Having 630 employee which contain 150 technicians
and more than 300 bachelors, 5 Masters, and 3 PhDs. Haida have won
2 national invention patents and over 100 utility model patents, At
the same time, established 5 industry-university-research
cooperation bases with universities and research institutes and
invited more than 20 doctoral supervisors as consultants.


Looking forward to the future, Haida will fulfill the mission of
"Deliver the best testing equipment to our customers" and adhere to
the core values of "Creative, Efficiency, Inheritance, Passion and
Persistence". Taking a green, low-carbon, and environmentally
friendly sustainable development path, Haida will continuously
optimize the product structure to realize the transformation and
upgrade of the enterprise itself. It is the eternal pursuit of
Haida people to build Haida into a comprehensive provider of
testing equipment with advanced technology, excellent quality,
high-quality service, and win-win cooperation!
