Add to Cart
2BV series water ring vacuum pumps are suitable for pumping the
gases and steam. Its suction pressure can reach 33mbar (abs) (i.e.
97 % vacuum degree). If the transformer oil is used as the
operating liquid, these pumps are called oil ring vacuum pump and
the suction pressure can reach 6.7mbar (abs) (i.e. 99 % vacuum
degree). So the oil ring vacuum pumps can replace the reciprocated
vacuum pumps completely. When the liquid ring vacuum pumps work
under the condition near the limited vacuum for a long time, it is
necessary to couple with the cavitation protection pipe in order to
get rid of the screaming and protect the pump.
When the compressors work, the maximum pressure is 0.26MPa(abs).
And the higher of discharge pressure, the larger of the power of
the compressors. So it is necessary that the data of the discharge
pressure is provided to choose the proper motor.
2BV series water ring vacuum pumps and compressors will replace the
SK and 2SK series water ring pumps and the W, WY, WL series
reciprocated vacuum pumps completely with their superior
performance and advantages.
2BV2-Ex,2BV6 series water ring vacuum pumps and compressors are
mainly used for pumping the explosive gases or work in the
flammable and explosive environment. The technical parameter of
each type is the same as the corresponding type of the 2BV2 or 2BV5
series products.
2BV series stainless steel pumps can be used under the conditions
with higher requirements for the corrosive-proof or the lustration.
According to the working situation, the material of all the parts
where the liquid flows (i.e. pump casing, pump cover, port plate,
impeller)are made of various stainless steel as bellow:
SUS304(0Cr18Ni9)
SUS316(0Cr17Ni12Mo2)
SUS316L(00Cr17Ni14Mo2)
The material of the shaft is 2Cr13 or 0Cr18Ni12Mo2Ti
The mechanical seals are used the John Crane products and the seals
material is optional for FPM or PTFE.
Comparing with the SK, 2SK, SZ water ring vacuum pumps, the 2BV
series products possess the characteristics as bellow:
The close-coupled design is convenient to install and can save
space.
The standard seals are all used the John Crane mechanical seals.
2BV series products have the cavitation protection port. When they
work under the condition near the limited vacuum, the cavitation
protect port opens (or connects with the separator)to get rid of
the screaming to protect the pump.
Aluminium bronze impeller is of high intensity and wearing well.
The erosive-proof capacity of the pump can be improved by using it.
If the parts where the liquid flows are made of the stainless
steel,the pumps can be used under the more rigorous condition.
The unique design of the discharge port can protect the pump from
the over-pressure to ensure the best efficient performance in the
working range of the pump.
The motors are all adopted Y2 series products. The protection class
is IP54 or IP55 (normal is IP44) and the insulation grade is F.
The bearings are all used the imported products with brand name of
NTN or NSK.