FLUODE Gas Sampling Bag

FLUODE Gas Sampling Bag

FLUODE film has the same characteristics as PVDF (Polyvinylidene fluoride). It is an alternative of PVDF film with low cost.

Features:

*superb strength and low permeability

*excellent chemical inertness and stability

Standard FLUODE Gas Sampling Bag Sizes:0.5L,1L,2L,3L,4L,5L,8L,10L,15L,20L,30L,and 40L or customized size.

Connectors

Side-opening stopcock valve Side-opening PTFE valve plus PTFE fitting

PTFE straight valve plus fitting

It is made of polytetrafluoroethylene (PTFE). The patented design utilizes mouldeling, self-sealing mechanism, no O-ring is inside therefore cross-contamination is eliminated. The PTFE valve can handle gases that there is not corrosive to PTFE. The valve can be used in VOCs analysis.

Product brochures

Operating instructions for FLOUDE bag

1.Avoid filling pressure higher than 6000Pa. Fill gas until the bag is fully expanded, however, it is not so tense when you press it using your finger.

2.Keep away from flame and high temperature when filling and storage. Avoid contacting sharp stuff.

3.Before use, flush sampling bags three times with the gas you want to fill.

4.When using a needle to draw gas from highly elastic septum, squeeze the septum with fingers in order to restore the sealing property after pulling out the needle.

5.Heat-resisitance temperatures should be 150°C to 170°C .

Operating instructions for FLOUDE bag

Detailed introduction

Fluode film has the same same characteristics as PVDF (Polyvinylidene fluoride). It is an alternative of PVDF film with low cost.Our FLUODE gas sampling bags are equipped with renovated, patented valves. Valve materials are polycarbonate . Unlike other popular valves, our valve does not have O-ring inside to prevent leakage so contamination is minimized.

Everyday new companies open, and companies die.

Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers.

Mianyang Prochema Commercial Co.,Ltd. is not an old company,but will be a 100-year company,because his founder has that dream.

Founder himself can not live 100 years,but his spirit and attitude will.

Honest and responsible and insistant are the key points for a company to be existed long enough.

In China,real 100-year company is rare.Hope Mianyang Prochema will the one.

History:

2004--Mianyang Prochema established,initially in insulation and printing plastic film

2007--Set up Gus Industry(hongkong)co.,limited for global business management

2008--Set up Shenzhen factory to produce the films and involved in conductive film and interactive touch screen

2010--Deeply involved in in-door advertising which is produced from the conductive film

2013--World wide promoting privacy PDLC switchable film and glass

Products and service catalogue:

1.Conductive film

ITO transparent conductive film

Copper grid transparent conductive film

Metal sputtered polycarbonate film

Touch screen and touch sensors

2.PDLC switchable film and glass,and car solar film

3.Printing film

Texutred hardcoated PET film

Printing grade Polycarbonate film

4.Insulation film

UL V0 polycarbonate film

UL V0 Polyester film

General electrical insulation PET film

Fluoro products and parts

ETFE film and PVF film

Perfluorinated ion exchange film

PVDF PIEZO film and sensors

Battery barrier film

5.Rugged TFT LCD display module and mainboard

Professional services need the service providers to be professional. Different from many other companies