PFA soler strip , PFA flat welding tape ,PFA welding strip

PFA solder strip, PFA flat welding tape, PFA welding strip

PFA welding rod is made from PFA resin and prepared by the technology of extrusion and molding. It can be machined into various sealing parts and electric components. It can be used at the temperature range of -200 through +260C degree. It is widely used for welding PTFE products, PFA products.

PFA electrode material performance:
1. for a small amount of perfluorinated propyl perfluorinated vinyl ether copolymer with ptfe.Molten enhanced bonding, melt viscosity decreased, and there were no changes in performance compared with ptfe.This kind of resin can be directly processed into products using common thermoplastic molding method.
2. long-term use of PFA electrode temperature - 80-260 degrees, have excellent chemical corrosion resistance, for all chemical corrosion resistance, friction coefficient, the lowest in the plastic and good performance, the electric insulation is not affected by temperature, is regarded as "plastics king".Its resistance to chemicals and ptfe are similar, is better than partial fluorine ethylene.
3. the creep resistance and compression strength is better than teflon, high tensile strength, elongation of up to 100-300%.Good dielectric properties, resistance to radiation performance.Flame retardancy.

Application:

1.Petrochemical and chemical processing

2.Electrical applications

3.Semi-Conductor Industry

4.Food, Beverage and Pharmaceutical industries

5.Laboratory applications

Lining Bearing pads, seals, and electrical insulation Lining Bearing pads, seals, and electrical insulation, liner tube, insulator tubing.

It is mainly used toweld kinds of pfa or PTFE products .

Characteristic

1. High and low temperature preservation

2. -200~260°C high temperature intensity better than F4

3. No-begriming ,and no-stagnant in tube

4. Security and insulation

5. Under 60HZ—60MHZ high and low temperature , permittivity is 2.1

6. If firing, and will still insulate

7. Voltaic are>165 seconds insulation

8. Erode preservation

9. Under high temperature, fluorin and alkali will reaction with PFA, no reaction with other acid.

10. Low water absorption<0.01%

11. No firing in air( oxygen index>95 vol.%)

Properties :

Everyday new companies open, and companies die.

Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers.

Mianyang Prochema Commercial Co.,Ltd. is not an old company,but will be a 100-year company,because his founder has that dream.

Founder himself can not live 100 years,but his spirit and attitude will.

Honest and responsible and insistant are the key points for a company to be existed long enough.

In China,real 100-year company is rare.Hope Mianyang Prochema will the one.

History:

2004--Mianyang Prochema established,initially in insulation and printing plastic film

2007--Set up Gus Industry(hongkong)co.,limited for global business management

2008--Set up Shenzhen factory to produce the films and involved in conductive film and interactive touch screen

2010--Deeply involved in in-door advertising which is produced from the conductive film

2013--World wide promoting privacy PDLC switchable film and glass

Products and service catalogue:

1.Conductive film

ITO transparent conductive film

Copper grid transparent conductive film

Metal sputtered polycarbonate film

Touch screen and touch sensors

2.PDLC switchable film and glass,and car solar film

3.Printing film

Texutred hardcoated PET film

Printing grade Polycarbonate film

4.Insulation film

UL V0 polycarbonate film

UL V0 Polyester film

General electrical insulation PET film

Fluoro products and parts

ETFE film and PVF film

Perfluorinated ion exchange film

PVDF PIEZO film and sensors

Battery barrier film

5.Rugged TFT LCD display module and mainboard

Professional services need the service providers to be professional. Different from many other companies