Light Steel Frame Prefab Mobile Homes House Kits To Build Metal WPC Cladding

Light Steel Frame Prefab Mobile Homes House Kits To Build Metal WPC Cladding

2 bedrooms 2 bathrooms 1 living room 1kichen 70.8m²

Foldable house 819#

DEEPBLUE foldable house, with advanced folding technology, has completed about 80% of the pre-installation in the factory, folded and loaded into the container for transportation. After arriving at the site, expand the main structure of the house, simply install the furniture then it can be put into use.

Description:

The Foldable House is 11.8 meters long and 6 meters wide. The foldable house is have two suites with washrooms. A wardrobe can be built next to the washroom, and a desk can be placed opposite the bed, which meets the needs of daily living and is economical.

Floorplan
Model: Foldable house 819#
House Width:6000mm
House Length:11800mm
Area:70.8㎡
Deck area:23.6㎡

Building materials:

4. Steel Batten 22 mm steel roof battens & batten 22mm steel
ceiling battens
5. High tensile Corrugated colored roof sheets in 0.42mm thickness,
gable flashings, ridge capping, valleys, barge capping & all fixings if
applicable.
6. Wall cladding: 8mm fiber cement board as cladding
7. Interior lining: 8mm fiber cement board
8. Aluminum sliding windows & sliding doors including standard fly
screens toAustralian Standards and as per plan specifications in
black color.
9. Glass wool R2.5 to main roof area unless otherwise specified.
10. Glass wool R3.5 breathable insulations to all exterior walls & gable
ends if applicable
11. Entrance door- Aluminum sliding door
12. Bathroom door –alum. door with steel frame and weather seal
13. Internal doors- plywood interior door.
14. Flooring: 9mm Laminated flooring
15. Cornering: 90mm coved plasterboard cornice
16. Skirting –MDF skirting
17. Robe & Linen cupboard support – gypsum board cornering.
18. 9mm gypsum board ceiling
19. 8mm cfc soffit lining
20. All P/C items: toilet, shower and washbasin w/mirror
21. Power points as per plan
22. Joinery as per plan


Applications:
Hotel, House, Office, etc.

Product Description:
DeepBlue earthquake proof prefabricated bungalow is based on a light gauge steel frame system with high-performance finishing materials. The whole house can be assembled within a couple of hours by 4workers.
the materials are the following:
1. Main structure: 89mm light gauge steel framing system based on AS/NZS 4600 standard.
the structure can be design to resist 50m/s wind and 9degree earthquake.
2. Roof structure: 89mm light gauge steel truss system.
3. Chassis: 89mm light gauge steel flooring chassis
4. flooring: 18mm fiber cement board with vapor barrier and bamboo flooring or wooden flooring, Pvc carpet, etc.
5.Wall cladding: 16mm PU insulated steel sandwich panel with beautiful decoration
6. interior lining: 9m fiber cement board, water-proof, termite-proof, security and healthy
7. ceiling: 8mm Pvc ceiling panel
8. insulation: 89mm glass wool insulation with good soundproof performance.
9.windows: PVC sliding windows
10.exterior door: high-quality aluminum sliding windows
11.interior door: painted wood door
12.bathroom: shower, washbasin, toilet included
13. roofing: corrugated steel roofing with the gutter system
14. veranda deck: W.P.C veranda flooring.


Specifications:
ISO standard steel structure house .one or two also three floors available. fireproof, heat insulation, wind, and earthquake resistance. green, energy-saving. economically.


Why Choose Light Gauge Steel Structure?

1)Lifetime for structure: 100 years.
2)Earthquake resistance: mix more than 8 grades.
3)Wind resistance:max 60m/s.
4)Fire resistance: all the materials used can be fire-resistant.
5)Snow resistance: max 2.9KN/m²as required
6)Heat insulation:100 mm in thickness can match 1 m thickness of the brick wall.
7)High acoustic insulation:60db of exterior wall 40db of interior wall
8)Insect prevention: Free from the damages by insects, such as white ants
9)Ventilation: a combination of natural ventilation or air supply keep the indoor air fresh and clean
10)Packing and delivery: 140SQM/ 40'HQ container for structure only and 90SQM/ 40'HQ container for structure with decorating materials.
11)Installation: the average is one worker one day install one SQM.
12)Installation guide: dispatch engineer to guide on site.

Design code:
(1)AISI S100 North American Specification for the Design of Cold-Formed Steel Structural Members published by the American Iron and Steel Institute (AISI) in the United States.
(2)AS/NZS 4600 Australian/New Zealand Standard-Cold-formed steel structures jointly published by Standards Australia and Standards New Zealand.
(3)BS 5950-5 Structural use of steelwork in building-Part 5. Code of practice for the design of cold-formed thin gauge sections published by BSI in the UK.
(4)ENV1993-1-3 means Eurocode 3: Design of steel structures; Part 1.3: General rules, Supplementary rules for cold-formed thin gauge members.

Resistant to various weather conditions, due to its light gauge steel framing system, DeepBlue Mobile Homes can resist winds up to 50m/s, 50cm snow loads as well withstand earthquakes due to its special steel structure technology.
The DeepBlue Mobile Houses manufacturing technology is truly a mature product characterized by flexibility and innovative design and solution.



Based on our patented foldable technology, transportation and erection can be done in a very simple and convenient way in order to save lots of time, energy, and unnecessary expenses.

Your first choice, Deepblue Prefabrica

Since David Chen first opened our doors in 2009, we have been proud to provide light gauge steel framing system,

prefab homes,light steel house, luxury villa, tiny house, townhouse, prefab house, prefab apartments, prefab commercial

buildings, military barracks, prefabricated dwelling and college dormitories to people all across the World.

We have a new large processing center and modern production workshop. This is to

ensurethat the accuracy of the production equipment, is in strict accordance with all

technical specificvations and maintains the highest quality control throughout production.

Our company operates by world class design, unmatched production systems, high

capacityassembly, and volume to completion capabilities. We have exported to more

than 60 countries to customers just like you, from all over the world。

We have exported to more than 60 countries to customers just like you, from all over the

world, who have watched their dreams come alive through our cnc machine, assisted by

our experienced steel structure engineer and professional and innovative design team.