
Add to Cart
The Environmental Protection LED Car Headlights Have Good Shock
Resistance For Both High And Low Beam Bulbs
The core working principle of LED automotive headlights lies in the
electro-optical conversion process of semiconductor light-emitting
diodes (leds), combined with the adaptive design of the automotive
electrical system, to achieve efficient and stable lighting
functions. Its principle can be broken down into three key links:
"core luminescence mechanism", "circuit drive adaptation", and
"optical system regulation", as follows:
Iii. Assistance: Regulation of the Optical System (Achieving
Effective lighting)
The light-emitting Angle of LED beads themselves is relatively
narrow (about 120°), and the light is scattered, which cannot
directly meet the requirements of "high beam focusing and low beam
anti-glare" for car headlights. Therefore, it is necessary to
regulate the light through an optical system. The main components
include:
Reflector cup/lens
Reflector cup: Through curved surface design, it reflects and
converges the scattered light emitted by the LED beads into
parallel light, increasing the illumination distance of high beam
(usually up to 150-200 meters, far exceeding halogen lamps).
Lens (mostly "dual-beam lens") : Built-in light shield, controlled
by a motor to rise and fall the light shield, achieving the
switching between "low beam" and "high beam" - when in low beam,
the light shield blocks part of the light to prevent direct
exposure to the driver of the oncoming vehicle (anti-glare); When
in high beam, the light shield is lifted, allowing the light to be
fully released and achieving long-distance lighting.
Lamp group structure design The matrix LED headlights of high-end
models will divide multiple LED beads into independent units (such
as 24 or 32), and each unit is controlled by a separate driver
chip. Combined with cameras and sensors (such as ADAS systems), it
can achieve "dynamic masking" (for example, after identifying
oncoming vehicles, turn off the LED units in the corresponding
area). Intelligent functions such as "avoiding glare" and "adaptive
steering" (when the vehicle turns, the LED unit in the
corresponding direction is illuminated to expand the lighting
range).
Product parameters
| Name | C7 car headlights | Model | H7 |
| Light source | CSP lamp beads | Material | Aviation aluminum materials, copper substrates |
| Color temperature | 6000K | Light effect | 103LM / W |
| Power | 20W | Luminous flux | 2070LM |
| Working voltage | DC12V±3V | Working environment | -40℃ ~ +80℃ |
| Waterproof grade | IP65 | Warranty period | 1 Year |
Product size
Compare the size of the halogen lamp with that of the original
vehicle
Note: The marked dimensions are measured manually and may have
minor errors. The actual size shall prevail