

Add to Cart
Power System 20kA Surge Protective Device With IP20 Round
Indication Window
OBV-II40-1 data:
Uc(maximum continuous operating voltage) | 385V |
Imax(maximum discharge current) | 40kA |
In(nominal discharge current for class II test) | 20kA |
Up(voltage protection level) | ≤2.0kv |
Combination | 2+0;1+1;3+0;4+0;3+1 |
response time | ≤25ns |
Signal deterioration indication | Red: replace Green:ok |
Housing Material | thermoplastic material |
Housing self-extinguishing class | UL94_V0 |
Temperature range | -40℃~+70℃ |
humidity range | 5%RH~95%RH |
Elevational | ≤2000m |
Method of connecting wire | Parallel Connect |
Thread Dimensions | 4~35mm2 |
Mounting method | DIN:35mm |
IP(degree of protection of enclosure) | IP20 |
Follow up standard | IEC 61643-11,GB/T 18802.1 |
Product design standards:
this product is designed in accordance with the relevant IEC
standards, product performance in accordance with IEC61643.11,GB
18802.1-2011 "low voltage surge protector (SPD) - Part 1: surge
protector performance requirements and test methods for low voltage
distribution system" national standard requirements.
Product structure:
this product adopts independent modular design, good sealing,
suitable for 35mm guide rail type installation. The lightning
protection module of each line adopts temperature control circuit
breaking technology and has over-current protection function.
Lightning protection module when the deterioration of automatic
tripping, can completely avoid fire risk. The lightning protection
module has a remote alarm interface, which is convenient for remote
monitoring
Features:
this product has the characteristics of low residual pressure, fast
response speed, large flow capacity (the maximum discharge current
Imax is 40kA/ pole), long service life, simple maintenance, easy
installation and so on.
Scope of application:
generally installed in the building low-voltage main distribution
cabinet/box, can protect installed in the building LPZ1 and LPZ2
boundary distribution system of all kinds of power supply into the
line end, withstand the impact voltage class II power supply
equipment.