Half Bridge Low Profile Medical Micro Load Cells Side Mounted CZL928F For Body Scale
Brand Name:UCHI
Certification:CE, ISO9001: 2008
Model Number:CZL928F
Minimum Order Quantity:500pcs
Delivery Time:14 workdays
Payment Terms:T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
Room 810, Unit 2, Building 5, Huixing Commercial Center, Dongsheng Road No.1, Zhongshan Dong, Shilong Town Dongguan, GUANGDONG, 523326 CN
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Half Bridge Low Profile Medical Micro Load Cells Side Mounted CZL928F For Body Scale
Introduction
A load cell is a force sensing module - a carefully designed metal
structure, with small elements called strain gauges mounted in
precise locations on the structure. Load cells are designed to
measure a specific force, and ignore other forces being applied.
The electrical signal output by the load cell is very small and
requires specialized amplification. Fortunately, the 1046
PhidgetBridge will perform all the amplification and measurement of
the electrical output.
Load cells are designed to measure force in one direction. They
will often measure force in other directions, but the sensor
sensitivity will be different, since parts of the load cell
operating under compression are now in tension, and vice versa.
This Single Point Load Cell is used in small jewelry scales and
kitchen scales. It’s mounted by bolting down the end of the load
cell where the wires are attached, and applying force on the other
end in the direction of the arrow. Where the force is applied is
not critical, as this load cell measures a shearing effect on the
beam, not the bending of the beam. If you mount a small platform on
the load cell, as would be done in a small scale, this load cell
provides accurate readings regardless of the position of the load
on the platform.
Product specifications
| 1. Rated Load | 50 (Kg) |
| 2. Rated Output | 1.0±0.15 mV/V |
| 3. Zero Balance | +/-0.5mV/V |
| 4. Input Resistance | 1000±10Ω |
| 5. Output Resistance | 1000±10Ω |
| 6. Excitation Voltage | 3-10VDC |
| 7. Nonlinearity | 0.3%F.S |
| 8. Hysteresis | 0.3%F.S |
| 9. Repeatability | 0.2%F.S |
| 10.Creep(30min) | 0.1%F.S |
| 11.Operating Temperature | -10℃ To +60℃ |
| 12.Temperature Effect on Zero | 0.3%F.S/10℃ |
| 13.Temperature Effect on Span | 0.3%F.S/10℃ |
| 14.Insulation Resistance | 2000MΩ(50VDC) |
| 15. Four Angle Error | +/-0.1%F.S |
| 16.Ultimate Overload | 150%FS |
NumberType="1" TCSC="0" w:st="on">5mm 4-wire shielding cable)
Installation
Single-Point Load Cells
A single-point load cell. Applying force to one end creates stress in the bar, causing the strain gauge encased in the white plastic to flex.This Single Point Load Cell is used in small jewelry scales and kitchen scales. It’s mounted by bolting down the end of the load cell where the wires are attached, and applying force on the other end in the direction of the arrow. Where the force is applied is not critical, as this load cell measures a shearing effect on the beam, not the bending of the beam. If you mount a small platform on the load cell, as would be done in a small scale, this load cell provides accurate readings regardless of the position of the load on the platform.
Button Load Cells
A button load cell. Applying force to the bump in the middle of the cell causes a change in the output.This Button Load Cell is used in applications that require a thin form factor. The bottom of the load cell is bolted, and force applied to the button on the top. By loading only the button, which is slightly rounded, the load cell is less sensitive to errors resulting from the load not pushing down exactly straight on the load cell.
A single-point load cell. Applying force to one end creates stress in the bar, causing the strain gauge encased in the white plastic to flex.This Single Point Load Cell is used in small jewelry scales and kitchen scales. It’s mounted by bolting down the end of the load cell where the wires are attached, and applying force on the other end in the direction of the arrow. Where the force is applied is not critical, as this load cell measures a shearing effect on the beam, not the bending of the beam. If you mount a small platform on the load cell, as would be done in a small scale, this load cell provides accurate readings regardless of the position of the load on the platform.
Button Load Cells
A button load cell. Applying force to the bump in the middle of the cell causes a change in the output.This Button Load Cell is used in applications that require a thin form factor. The bottom of the load cell is bolted, and force applied to the button on the top. By loading only the button, which is slightly rounded, the load cell is less sensitive to errors resulting from the load not pushing down exactly straight on the load cell.
Half Bridge Low Profile Medical Micro Load Cells Side Mounted CZL928F For Body Scale
Inquiry Cart
0