

Add to Cart
The SinoV-TE110E-B is a with 1 ports, selectable E1 (32-channel) or
T1 (24-channel) card that supports all the functionality of the
Digium quad T1/E1 card. This card supports both voice and data
modes on its single span. For example, the card can support 12
channels dedicated to voice and 12 to data while passing all
traffic through to the Asterisk PBX, which reliably routes the
channels to their designated locations. This eliminates the need
for an external router.
By utilizing our TDMoE technology, an exclusive Digium process, one
can easily connect multiple PCs equipped with the card and achieve
voice quality on par with single PBX implementations. Scalability
for this product is derived from adding multiple cards to each
individual PC. Add addition cards as you need them for your
expanding applications.
The card supports industry standard telephony and data protocols,
including both RBS and Primary Rate ISDN (PRI) protocol families
for voice and PPP, Cisco HDLC, and Frame Relay data modes. The
board drives both line-side and trunk-side interfaces, including
call features.
The card is a compact and powerful interface supporting voice and
data transmission over T1, E1, and Primary Rate ISDN (PRI)
connections. A low profile, half-length PCI form factor allows this
device to fit within a 2U rackmount case or equivalent chassis,
offer excellent density for call center, service provider, and
other space-sensitive applications.
Of course, the asterisk card is fully supported by Digium open
source Asterisk PBX software. Used in conjunction with Asterisk,
the card offers the power to create a seamless network,
interconnecting PSTN with the emerging Voice-over IP technologies.
The card can be used to deliver a wide range of PBX and IVR
services to the network or handset including Three-Way Calling,
Call Conferencing,Voicemail ,and VoIP Gateways.
Interfaces:
- 1X E1/T1 interfaces ( E1/T1 selectable)
-PCI-E interface 2U classis high
Features:
One PRI port 30 channels
Hardware DTMF detection
Conference Bridge
PCM bus connectors (PCM30, PCM64, PCM128)
1 dual-color LEDs (layer 1 state indicators)
Active channel switching (across multiple cards over the external
PCM bus)
PRI ISDN protocol stack
Applications:
ISDN PRI PBX
ISDN least cost router
Voice over IP PRI gateways
VoIP integration of ISDN equipment
PBX to PBX trunking
IVR
Data Modes:
Cisco HDLC
HDLC
PPP
Multilink PPP
Frame Relay
Voice Modes:
-EuroISDN
-AT&R 4ESS
-Lucent 5E
-National ISDN2