Nozzle Cleaner SMT Cleaning Equipment Energy Efficient Cleaning Low Noise Automatic

Nozzle Cleaner SMT Cleaning Equipment Energy Efficient Cleaning Low Noise Automatic Advantages:

1. No cleaning solution is required
2. low noise
3. Energy efficient
4. Wash 36 nozzles one time

Machine Description:

The latest intelligent nozzle cleaning machine CW-36 with a moving fixture, dry at the same time while cleaning. Clean 36 nozzle per time, breaking the traditional cleaning machine cleaning methods and the number of restrictions. It uses pure water or DI water to clean, cleaning effect is good, cleaning rate of 99% or more, after this upgrade to join the intelligent detection of water storage device, whether the lack of water or too much water affect the cleaning effect function, no need to worry about water lacking or more water, so cleaning more peace of mind, more intelligent. Standard equipped with a special nozzle detection device for the nozzle after cleaning detection.

Machine Feature:

1. Clean 36 nozzles per time, quicker and more efficient
2. Automatic cleaning, avoid troubles caused by ultrasonic cleaner, reduce rejection rate.
3. To clean the dirt completely which ultrasonic cleaner can not deal with
4. Cleaning result will not affect by the smaller and smaller nozzle
5. Thoroughly clean 99% dirty nozzle, extend the lifespan of nozzle
6. Protect the coating surface of nozzle and its reflection panel.
7. Never use solvent, only environmentally friendly DI water is enough
8. Easy operation
9. Applicable to all kinds of mouter nozzles, especially on corss, I-shape, odd shape nozzles

Machine Specification:

Contrast with traditional cleaning:

1, Artificial wind guns

① Manual cleaning efficiency is low, the nozzle surface and the lumen can not be cleaned, the hole with a steel wire stabbed easily damaged;

② Cleaning effect difference;

③ The use of cleaning fluid and alcohol may penetrate to cause the reflective layer to fall off.

2, Ultrasonic cleaning

① Low cost and high efficiency;

② Cleaning process can easily lead to collision

between the nozzle, resulting in damage to the surface

of the black coating or fall off;

③ Cleaning fluid on the nozzle surface coating damage, greatly reducing the use of nozzle life;

④ Can not completely clean the nozzle surface and lumen;

⑤ For the latest 01005 and 0201 nozzle can not be a

good cleaning, mainly due to the nozzle hole is too small, ultrasonic cleaning can cause vacuum bubbles can not be discharged and cleaning is not clean.

Contrast with ultrasonic cleaning:

Established in 2004, Chuangwei Electronic Equipment Manufactory is a professional manufacturer and exporter that is concerned with the design ,development and production of pcb depaneling machine, covering punching, routing, laser depaneling & v-groove cutting, hot bar soldering machine & other SMT equipments. We are located in Dongguan City with convenient transportation access.

Products are widely used in Automative electronic industry, Mobile industry, Computor industry, Power supply industry, Connector and cable industry, household appliances industry, LED lighting industry.

Covering an area of over 2000 square meters ,we now have over 45 employees,boast an annual sales figure that exceeds USD4000000 and currently export 45% of our production worldwide.

Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction. Beside,we have CE certificate for all equipments.

As a result of our high quality products and outstanding customer service ,we have gained a global sales network reaching Europe and America.

If you interested in any of our products or would like to discuss a custom order,please feel free to contact us ,We are looking forward to forming successful business relationships with new clients around the world in the near future.