ASME SA213 TP904L UNS NO8904 Stainless Steel U Bend Tube 19.05 MM X 1.65MM for Heat Exchanger
Brand Name:YUHONG SPECIAL STEEL
Certification:ISO9001-2008
Model Number:Stainless Steel U Bend Tube ASME SA213M-2013a, TP317 / TP317L / TP321 / TP321H/TP316Ti, TP310
Minimum Order Quantity:100KGS
Delivery Time:10days->
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Ningbo Zhejiang China
Address:
20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Supplier`s last login times:
within 3 hours
Product Details
Company Profile
Product Details
ASME SA213 TP904L UNS NO8904 Stainless Steel U Bend Tube 19.05 MM X 1.65MM for Heat Exchanger
YUHONG GROUP Stainless Steel 904L Seamless Round Tubes, TP904L Stainless Steel Industrial Seamless Tubes, ASME SA213 Stainless Steel WERKSTOFF NR 1. 4539 Seamless Steel Tubes Supplier, Stainless Steel N08904 Seamless Tubes, Stainless Steel 904L Cold Drawn Tubes, SS 904L Seamless Tubes, ASTM A213 TP 904L SS Seamless Tubes Supplier in UAE, Stainless Steel 904L Seamless Steel Tube Supplier, N08904 Stainless Steel Seamless Tube, SS 904L Steel Tube Stockist, SS 904L Seamless Instrument Tube, 904L Stainless Steel Seamless Tube Distributor
Chemical Composition Of Stainless Steel 904L Seamless Tubing
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Cu |
| SS 904L | 0.020 max | 2.00 max | 1.00 max | 0.040 max | 0.030 max | 19.00 – 23.00 | 4.00 – 5.00 max | 23.00 – 28.00 | 1.00 – 2.00 |
ASME SA 213 SS 904L Seamless Tube Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.95 g/cm3 | 1350 °C (2460 °F) | Psi – 71000, MPa – 490 | Psi – 32000, MPa – 220 | 35 % |
Equivalent Grades Of Stainless Steel 904L Seamless Tubes
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
Customer Specifications
Bending Radius: From 1.5*OD(Outside Diameter) To 1500mm
When Ordering Tubes With Radius less or equal to 1.5*OD, It Is
Necessary To Agree Precision Of Geometrics.
Straight Tubes Maximum Length:(Before Bending): 35000 mm.
Leg Length: Min 1 Meter, Max. 16500 mm (For Max R=1500mm)
Note: Other Size Are Available Upon Agreement.
Heat Treatment: Stress Relieved After U-Bending (Bending Area Plus 300MM For Each
Leg).
Hydrostatic Test After U Bending: Maximum Test Pressure 600 Bar, Soaking 10 Sec. With
Dematerialized Water. Compressed Air Cleaning After Hydro-Test.
Packaging: In Strong Transport-Worthy Pre-fumigated wooden boxes of
corresponding dimensions for
each tube Length, Radius, Diameter, According To PO requirements as
well as wrapped In polyethylene
films With soft plastic caps on both end of Tube.
Some of the quality tests carried out by us includes:
| Corrosion Test | Conducted only when specially requested by the client |
| Chemical Analysis | Test done as per required quality standards |
| Destructive / Mechanical Testing | Tensile | Hardness | Flattening | Flare | Flange |
| Reverse-bend and Re. flat tests | Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms, which ensures trouble-free expansion, welding & use at customers end |
| Eddy Current Testing | Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System |
| Hydrostatic Testing | 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s . |
| Air Under Pressure Test | To check any evidence of air leakage |
| Visual Inspection | After passivation, every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections |
Supplementary Testing : Apart from the above mentioned tests, we also carry out on the
manufactured products supplementary testing. The tests conducted
under this include:
|
|
|
ASME SA213 TP904L UNS NO8904 Stainless Steel U Bend Tube 19.05 MM X 1.65MM for Heat Exchanger
Inquiry Cart
0