SA179 Embedded G Type Finned Tube Aluminium Fin For Air-Cooled Radiator

Overview

Finned tubes are divided into various forms and materials, commonly used for industrial heating, cooling, etc. It uses a high-frequency power source as the heat source to simultaneously heat the steel pipe and strip, so that they are fused and welded together as a whole. Usually made of high-quality seamless steel pipes, their diameter, wall thickness, and length can be selected according to the needs of users, which can meet their different needs.

Finned tubes are the main heat dissipation components of finned tube radiators. The advantages of finned tubes are small size, large heat dissipation area, corrosion resistance, and high pressure resistance. Generally, the diameter, width, and spacing of finned tubes can affect their heat dissipation effect. Convection heat dissipation is usually used, which ensures stable and uniform heat dissipation without the problem of upper cooling and lower heating.

Embedded finned tube is a pre machined spiral groove of a certain width and depth on a steel pipe, and then the steel strip is embedded on the steel pipe on a lathe. During the winding process, due to a certain pre tightening force, the finned tube steel strip will be tightly clamped in the spiral groove, ensuring a certain contact area between the steel strip and the steel pipe. To prevent the steel strip from rebounding and falling off, both ends of the steel strip should be welded to the steel pipe. For ease of installation, there should be a certain side gap between the steel strip and the spiral groove. If the side gap is too small to form interference, the inlay process is difficult to proceed smoothly. In addition, the wrapped steel strip always has a certain degree of rebound, which results in poor joint between the steel strip and the bottom surface of the spiral groove. Inlaying fins can be carried out on general equipment at a low cost, but the process is complex and the production efficiency is low.

Features of A179 Tube

The A179 tube, commonly referred to as ASTM A179, is a specification for seamless cold-drawn low-carbon steel heat exchanger tubes. Here are its key features:

• Low-Carbon Steel: Typically composed of carbon content not exceeding 0.18%, providing good weldability and machinability.

• Tensile Strength: Minimum yield strength of 30,000 psi (207 MPa) and tensile strength of 45,000 psi (310 MPa).

• Ductility: High ductility, allowing for easy forming and shaping.

• Seamless Construction: Produced through a seamless process, ensuring uniformity and eliminating weak points found in welded tubes.

• Cold Drawn: Cold drawing enhances dimensional accuracy and surface finish.

• Sizes: Available in various diameters and wall thicknesses, typically ranging from 1/2 inch to 4 inches in outer diameter.

• Length: Custom lengths can be manufactured according to specific requirements.

• Suitable for Mild Environments: Offers limited corrosion resistance; typically used in applications where exposure to aggressive media is minimal.

SA179/A179 Base Tube Specificaiton

Chemical Composition of A179

Mechanical properties of A179

Application:

• Heat exchangers for power plants (electric, nuclear, thermal and geothermal power plants)
• Steam condensate systems
• Chemical and petrochemical industry
• Food processing plants
• Refrigeration technology
• Industrial (steel mills, incinerators, gas compression facilities).