Add to Cart
35.2mm Core 46mm Hole Double Tube Core Barrels
Generally, there are three kinds of core barrel depending on the tube quantity of the core barrel.
Double Tube Core Barrels
TT Series Core Barrel
◆Ultra-thin wall double tube core barrels, available diameters 46
and 56 mm. Very thin cutting face allows very rapid penetration
rate through hard formations. They are suitable for underground
mining applications.
----T2 Series Double Tube Core Barrels
◆The T2 Series are thin wall double tube core barrels, used for
surface exploration, especially mining applications. Due to their
thin kerf, these core barrels provide rapid penetration. Available
in diameters 36, 56, 66, 76, 86, 101mm.
----T6 Series Double Tube Core Barrels
◆These are a continuation of the T2 series, but of a sturdier
design and available in larger diameters, 76, 86, 101, 116.131 and
146mm. They are applied in surface mining and geotechnical
drilling.
----LTK Series Double Tube Core Barrels
◆The LTK series core barrels system is a thinner wall core barrel
than T2 series. They offer a cost effective, high production, which
is designed for optimum production and core recovery in medium to
extra hard rock formations. Available sizes 48 and 60mm.
----WF Series Double Tube Core Barrels
◆They are geotechnical core barrels primarily designed for coring
in relatively soft formations by using face-discharge bits. With
simple construction they' re more resilient to damage than
thin-wall barrels, but with slower penetration rate.
-WG Series Double Tube Core Barrels WG
◆There are double tube core barrels for WG series. Available in
DCDMA sizes E, A, B, N, and H. WM Series Double Tube Core Barrel
◆WM series double tube core barrels was developed as a solution to
the ever present problem of recovering a high percentage of core
when drlling badly fractured or broken strata or soft and friable
material that is easily eroded by the circulating fluid. Mud or
water can be used with this core barrel while diling. It has more
sturdy design compared to the metric series core barrels.
---- Wireline Double Tube Core Barrels
◆Wireline double core barrels are primarily used in deep coring.
With an overshot device, they eliminate the need to couple and
uncouple the rod string each time the core is retrieved.
◆Chinese Standard Double Tube Core Barrels
◆Chinese Standard Wireline Double Tube Core Barrels
◆Jet-type Reverse Circulation Double Tube Core Barrel
Technical parameter of TT series double tube core barrel
Size | Hole | Core | Head Thread |
TT46 | 46mm | 35.2mm | As per need |
TT56 | 56mm | 45.2mm | As per need |
Components
1. Double Tube Core Barrel Head
2. Inner Tube
3. Extension Tube
4. Core Lifter
5. Core Lifter Case
6. Outer Tube
7. Thread Protector
Note:
1. Core Bit and Reaming Shell are not supplied with the core
barrel, and shall be ordered separately.
2.1.5m and 3.0m length core barrels are available.
Any further request, please feel free to contact with us.