High Lumen CE Approved 100W COB LED FloodLights 85 - 265V AC / 50Hz

Brand Name:Spring-Lighting
Certification:CE.RoHS.CAS.C-Tick
Model Number:SPL-FL80WSA
Minimum Order Quantity:50PCS
Delivery Time:7 - 15 working days after your payment (up to your quantity).Sample only 1-3 working days.
Payment Terms:T/T in advance.
Contact Now

Add to Cart

Active Member
Location: Shenzhen Guangdong
Address: 5/F, Bldg.C, YuanLing QiaoTong Industrial Zone, ShiYan Town, Baoan Disrtict, Shenzhen China
Supplier`s last login times: within 38 hours
Product Details Company Profile
Product Details

CE Approved high lumen 100W COB LED Flood Light

Specification of LED Flood Light:

1. Input voltage: 85-265V AC/50Hz
2. Beam angle: 120 degree
3. Lumen output: >1100Lm
4. Reflector efficiency: 90%
5. Housing Material: Stainless steel+aluminium


Features


1. US Bridgelux high-lumen Integrated Multiple LED Chip
2. Taiwan Meanwell Power Supply (UL approved), reliable and stable
3. Wide range of input voltage are optional: AC85-265V (normal) or AC85V-277V
4. Excellent thermal management
5. High quality multi-surface die-casting aluminum heat sink
6. Waterproof IP65 with tempered glass cover
7. Environment friendly and energy saving. Contain no mercury or lead. Consume 50%-70% less power than sodium light


Application


1. Projector of building
2. Tunnel Lighting / Pathway Lighting / Park Lighting
3. Workshop/Supermarket/Exhibition hall


Light Distribution Curve


Dimension



Package Information
Packing: 1pc/Carton
Packing Material: EPE cotton + double strength corrugated board
Carton Size: W42 * L48 * H20 CM
Gross Weight: 10KG

Attention
1. Pls read the product specification carefully, confirm the use environment is in line with the condition of specification, then can go ahead install.
2. Pls ensure the switch is in off state before the product connected to the power supply.
3. Lamps should be installed by qualified electrician, electrical wiring conforms to the IEE standards or national standards.
4. This product use both for indoor and outdoor.
5. Pls do not under the condition of voltage too high or too low for long-term use, it will effect the function of normal use and lifespan.
6. Not installed in the fuel for use, no matter in which situation, lamps can not be covered with insulating material or similar material.
7. When installation, replacemen, clean lamps, must cut off power supply ensure the personal safety.
8. When found abnormal work of lamps(self-extinguishing, flash), pls check the plug contact performance and power supply voltage is normal, if normal, fault has not ruled out, you need to change the new lamp.
9. Need to clean the surface of lamps, pls disconnect the power supply. Dry with soft cloth glued soapy water after cleaning, reoccupy does cloth to wipe, pls do not use banana oil wait to wipe the surface of lamps, also do not spraying the lamps of any chemicals, or lamps may discolor or damage.
10. Pls do not disassemable the product itself, so as not to damage the internal components. Removed by yourself can not enjoy the warranty service.

OPTICALModel No.SPL-FL100WSDSPL-FL120WSDSPL-FL150WSD
LED Power Consumption100W120W150W
LED Initial Flux100lm-110lm/per watt (Pure white)
Lamp Maintain Flux
(after lens and thermal stabilization)
75lm-85lm/per watt (Pure white)
Illumination (Enadir)
(LED Power=100W)
MountHeight=6M: >101Lux
MountHeight=8M: >57Lux
MountHeight=10M: >36Lux
MountHeight=12M: >25Lux
CRIWW: Ra>60 PW: Ra>70
Light Distribution CurveCircle Facular
Beam Angle120 degree
Light Decay Rate<15% (20,000 hours)
ELECTRICALInput VoltageAC85V-265V/ AC85V-277V+ (50Hz-60Hz)
Working Voltage36VDC
Lamp Efficiency>85%
Power Factor>0.95
IP RateIP65 (outdoor use) / IP50 (indoor use)
MECHANICALDimension33(W)*40.3(L)*12(H)cm
Net Weight5.2kg
MaterialDie-Cast Aluminum + Tempered Glass
China High Lumen CE Approved 100W COB LED FloodLights 85 - 265V AC / 50Hz supplier

High Lumen CE Approved 100W COB LED FloodLights 85 - 265V AC / 50Hz

Inquiry Cart 0