Add to Cart
Due to the flow increase, the valve size can be reduced!
Saves energy and space
1. Power consumption: 0.1 W (With power saving circuit)/0.35 W
(Standard)
2. Plug-in sub-plate has been newly added!
3. Plug-in metal base (IP40)/Plug-in connector connecting base
(IP67)
4. Manifold type no.: SS5Y3, SS5Y5, SS5Y7
5. Can be connected to F.R.L. units (AC-D series) (-X990)
Valve type | Rubber seal | Metal seal | ||
Fluid | Air | |||
Internal pilot operating pressure range [MPa] | 2-position single | 0.15 to 0.7 | 0.1 to 0.7 (High pressure type: 0.1 to 1) | |
2-position double | 0.1 to 0.7 | |||
3-position | 0.2 to 0.7 | |||
4-position dual 3-port valve | 0.15 to 0.7 | — | ||
External pilot operating pressure range [MPa] | Operating pressure range | –100 kPa to 0.7 (4-position: –100 kPa to 0.6) | –100 kPa to 0.7 (High pressure type: –100 kPa to 1) | |
Pilot pressure range | 2-position single | 0.25 to 0.7 | 0.1 to 0.7 (High pressure type: 0.1 to 1) | |
2-position double | ||||
3-position | ||||
4-position dual 3-port valve | Operating pressure + 0.1 or more (Min. 0.25) to 0.7 | — | ||
Ambient and fluid temperatures [°C] | –10 to 50 (No freezing) | |||
Max. operating frequency [Hz] | SY3000 SY5000 | 2-position single/double | 5 | 20*1 |
4-position dual 3-port valve | ||||
3-position | 3 | 10*1 | ||
SY7000 | 2-position single/double | 5 | 10*1 | |
4-position dual 3-port valve | 3 | — | ||
3-position | 3 | 10*1 | ||
Manual override | Non-locking push type | |||
Push-turn locking slotted type | ||||
Push-turn locking lever type | ||||
Slide locking type | ||||
Pilot exhaust type | Internal pilot | Main/Pilot valve common exhaust | Main/Pilot valve individual exhaust | |
External pilot | Pilot valve individual exhaust | |||
Lubrication | Not required | |||
Mounting orientation*2 | Unrestricted | Single: Unrestricted Double/3-position: Main valve is horizontal. | ||
Impact/Vibration resistance*2 [m/s2] | 150/30 | |||
Enclosure | IP67 (Based on IEC60529)*3 | |||
Coil rated voltage [DC] | 24, 12 V | |||
Allowable voltage fluctuation [V] | ±10% of rated voltage*4 | |||
Power consumption [W] | Standard | 0.35 (With indicator light: 0.4) | ||
High pressure type, Quick response type | 0.9 (With indicator light: 0.95) | |||
With power saving circuit | Standard: 0.1*5 (With indicator light only) [Inrush 0.4, Holding
0.1], High pressure type: 0.4*5 (With indicator light only) [Inrush 0.95, Holding 0.4] | |||
Surge voltage suppressor | Diode (Varistor for non-polar type) | |||
Indicator light | LED |
Due to the flow increase, the valve size can be reduced!
1. IP67 enclosure for standardspecifications
2. The M12 waterproof connectortype ensures easy
attaching/detaching and wiring.
3. Applicable to the side, top, andbottom-ported types (4A and
2Bports)
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.