Add to Cart
Specification
1. Note: The product is for industrial. Please attention to use.
2. For the proper operation of the product, please readthis
carefully.
For security, be sure to comply with it.
Warning: if use it in a wrong way, may cause the user serious injury or
death.
1. When clean, repair and check, please pumping out the compressed
air in the pressure container. If there is residual air, the
component will fly up, cause damage.
2. For installation, must according to this manual. Wrong
installation will cause water leakage or air leakage.
3. Do not use other liquid, only the specified. Authorized liquid,
is compressed air, Others may cause the product broken, like
breakdown, leakage and etc.
4. Confirm the piping of drainage. Inappropriate piping, will cause
leakage and get wet the facility.
5. When transfer and lend the products, please transmit the manual
too. When sell or transfer the used products, in order to let the
new user could use safely, please place the manual obviously.
6. No drain without water. Please close the handle of the inlet
drainage device. Or, the valve core will be abnormal abrasion.
7. How to keep the product (Long time without use)
1). Dismantle the product after close the ball valve.
2). Drain out the water in drain-pipe. Get rid of the water in the
drainage device. Observe from the bottom up, turn right, to drain
out the water in the cup.
3). Keep away the garbage, dust and rainwater when keep the
product.
Attention: If there's water residual in the drain-pipe, will cause
the internal parts corrosion and damage, lead to breakdown.
Installation
1. Attention: As include plastic parts, cannot be installed at the
environment which contains the following materials. Direct sunlight
also should be avoid.
Chemicals Type | Type | Main products | General use |
Inorganic chemicals | Acid | Hydrochloric acid, Sulfuric acid, Fluorine acid, Phosphoric acid, Chromic acid, etc | Metal pickling solution, Acidic degreaser, Leather coating liquid |
Orgnic chemicals | Aromatic hydrocarbon | Benzene, Toluene, Xylene, Ethylbenzene, Styrene, etc | Paint diluent |
Alcohol | Methyl alcohol, Medicinal alcohol, Cyclohexylethanol, Benzil alcohol, etc | Antifreeze liquid | |
Phenol | Methyl carbonate, Cresol, Naphthol, etc | Raw material of Detergent and Phenol resin | |
Ketone | Acetone, Methyl ethyl ketone, Cyclohexanone, Acetopheneone acid, etc | ||
Carbon acid | Formic acid, Acetic acid, Butyric acid, Acrylic acid, Oxalic acid, Phthalate, etc | Chemical base of Dyeing agent and Aluminum coating treatment | |
Oxygen acid; Alkyd | Glycolic acid, Lactic acid, Malic acid, Citric acid, etc | Food additive | |
Amine | Methylamine, Dimethylamine, Ethylamine, Aniline, Acetainilide, etc | Brake oil additives, Antistatic agent, Dye for plastic |
2. Installation method.
Note: When install the drain-pipe, please be sure the status in
outlet. Inappropriate piping, will cause leakage and get wet the
facklity.
1). Pipe size
Inlet: Rc1/2 Outlet: Rc1/2
2). Installation and piping of drainage
When the drain-pipe outlet is downward, the product should be
vertical installation. Check valve must be installed at the
drain-pipe inlet.
Application method
1. Regulate the water displacement
The working clearance of drainage device will be different,
according to the load and pressure. Cannot regulate the valve when
the cup filed with water.
2. Note: Water comes from the compressed air is limited, so please
do not set for empty working continuous. If not, will cause:
1). Valve core will be abnormal abrasion.
2). The insterstice will get shorter.
3). Abrasion will be speed up.
4). Spray continuously.
3. Note: If there is too much oil, will cause:
1). Output will be reduced.
2). The interstice will get longer. If there is too much oil,
please regulate the oil regulator.
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item
defective in 3 Month, We will offer replacement without extra
Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We
will contact suppliers or Manufactory for Warranty. Buyers Might
Need to pay the Shipping fee For resend the replaced item.
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL
will be normal ways. If you require use of a courier, we can do it.
Serves time
0:00 - 23:59
From Monday to Sunday