8-48F wall mount or pole installation fiber optic FTTX enclosure
Brand Name:DYS/OEM
Certification:IS09001-2015.ROHS
Model Number:8-48F wall mount or pole installatio
Minimum Order Quantity:Negotiable
Delivery Time:2days
Payment Terms:T/T or L/C,Western Union
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
2/F,7Building, Tangtou Industrial Zone 3rd, Shiyan Town, BaoAn District, Shenzhen, P. R. China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
FTTX Enclosure is a new economic fiber distributed solution for outdoor use. Compare traditional products, FTTX Enclosure is easy to operate and has high compatibility. It can be used for wall-mounting, aerial installation or holding pole installation, based on different situation.FTTX Enclosure not only used in FTTH field, but also used in FTTA or other harsh environment.
Application
FTTH field
Traditional solution use ONU or FDH (Optical Network Unit/Fiber
Distribution Hub), when trunk optical cable arrives to outside of mansions and villas. FTTX Enclosure can replace ONU or FDH
because it has fiber distribution function. Inside, it can be fixed
2-4pcs 1*8 or 1*16 PLC, and can be put 24pcs fiber splice
protection sleeves. After mating with 1-48F IP67 preassembled
waterproof connector, FTTX Enclosure can connect each mansion and
villa or low voltage silo directly. It can be fixed outside of
mansions and villas, or holding pole installation. FTTX Enclosure
can reduce signal loss through less connecting node. For in factory
preassembled FTTX Enclosure, it’s no need high skill operator
because of no fiber splice operation. Installation efficiency can
be increased by 40%.
FTTA field
Traditionally, Remote Radio Unit (RRU) and Building Base band Unit
(BBU) connected by optical fiber cable, forme star network
technology. Each RRU need one duplex outdoor cable link to BBU.
Installation will need more time and cost will be high.FTTX
Enclosure work as an Aggregation/Demark box, link RRU and BBU
together. From BBU to FTTX Enclosure, only need one multi-fiber
hybrid cable. Then FTTX Enclosure divide fibers to each RRU through
IP67 preassembled waterproof cable assemblies. RRU can get power
through assembled power connector on FTTX Enclosure.It can avoid
needless duplication.
Trunk Cable Connecting
Trunk cable needs to be fusion welded frequently because of each
drum cable length limited. So connecting point is weak and need to
be protected very well. When trunk cable comes into FTTX Enclosure,
it will be sealed and fixed by torsion proof cable gland (plastic
or metal type). For 5mm-14mm out diameter cable,FTTX Enclosure has
different accessories to fit. Torsion gland can release stress when
trunk cable bending and protect fiber avoid breaking. Inside of the
FTTX Enclosure, main cable and strength member were fixed by
fastener, which make sure the box can stand 1200N pulling force
long term. Splice protection sleeve (Max. 24pcs) and PLC (Max.2pcs)
can be fixed on the body, which make FTTX Enclosure fiber divided
very easy. Anti-skid design on the base case, which makes sure FTTX
Enclosure holds wire/pole firmly.
Features and Benefits
*High compatibility: can be assembled ODVA, Hconn, Mini SC, ODC,
PTLC, PTMPO or power adapter.
*Factory-sealed or field assembly.
*Strong enough: working under 1200N pulling force long term.
*From 2 to 12 ports for single or multifiber harsh connectors.
*Available with PLC or splice sleeve for fiber divide .
*IP68 waterproof rating.
*Wall-mounting, aerial installation or holding pole installation.
* Decreased angle surface and height make sure no connector
interfering when operating.
*Meet IEC 61753-1 standard.
*Cost effective: save 40% operating time.
8-48F wall mount or pole installation fiber optic FTTX enclosure
Inquiry Cart
0