Home /Switching Power Supply /

48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply

48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply

Brand Name:MEAN WELL
Model Number:DRT-240-48
Minimum Order Quantity:2 sets
Delivery Time:15 days after signing the contract
Payment Terms:T/T
Place of Origin:China
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 27P , Block B , Duhui 100 , Zhonghang Road , Futian District , Shenzhen , China
Supplier`s last login times: within 9 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Original SE-100-24 24V/4.5A Single Output AC to DC High-power Switching Power Supply


Features :

  • Three-phase AC340-550V wide range input
  • High efficiency 89% and low dissipation
  • Protection : short circuit / overload / over voltage / over temperature
  • Cooling by free air convection
  • Built-in constand current limiting circuit
  • Can be installed on DIN rail TS-35/7.5 or 15
  • UL508 ( industrial control equipment ) approved
  • EN61000-6-2 ( EN50082-2) indusctrial immunity level
  • 100% full load burn-in test
  • Fixed switching frequency at 70KHZ
  • 3 Years warranty
MODELDRT-960-48
OUTPUTDC VOLTAGE48V
RATED CURRENT20A
CURRENT RANGE0 ~ 20A
RATED POWER960W
RIPPLE & NOISE (max.)80mVp-p
VOLTAGE ADJ. RANGE48 ~ 55V
VOLTAGE TOLERANCE±1.0%
LINE REGULATION±0.5%
LOAD REGULATION±0.5%
SETUP, RISE TIME200ms, 60ms/400VAC 200ms, 60ms/500VAC at full load
HOLD UP TIME (Typ.)14ms/400VAC 30ms/500VAC at full load
INPUTVOLTAGE RANGEThree-Phase 340 ~ 550VAC (Dual phase operation possible in connecting L1,L3,FG Note.5)
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)92%
AC CURRENT (Typ.)2A/400VAC 1.6A/500VAC
INRUSH CURRENT (Typ.)COLD START 50A
LEAKAGE CURRENT<3.5mA / 530VAC
PROTECTIONOVERLOAD105 ~ 125% rated output power
Protection type : Constant current limiting, unit will shut down o/p voltage after 3 sec. , re-power on to recover
OVER VOLTAGE59 ~ 66V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE110°C ± 5°C (TSW1) detect on heatsink of power switch 85°C ± 5°C (TSW1) detect on heatsink of power switch
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENTWORKING TEMP.-20 ~ +60°C (Refer to "Derating Curve")
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85°C , 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/°C (0 ~ 50°C)
VIBRATIONComponent:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)SAFETY STANDARDSU508, UL60950-1, TUV EN60950-1 approved
WITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C / 70% RH
EMC EMISSIONCompliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
OTHERSMTBF122.5K hrs min. MIL-HDBK-217F (25°C )
DIMENSION276*125.2*100mm (W*H*D)
PACKING3.3Kg; 4pcs/14.2Kg/1.14CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Dual phase operation(connecting L1,L3,FG)is allowed under certain derating to output load. Please refer to the derating curves for details.





China 48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply supplier

48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply

Inquiry Cart 0