Anti - Clipping Detect Transducer Calibration Tester K3163i Automatic Test Results Assume

Brand Name:KINGSINE
Certification:ISO9001,CE
Model Number:K3163i
Minimum Order Quantity:1 set
Delivery Time:15 working days
Payment Terms:T/T in advance,L/C
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong
Address: 6/F, Block 4-CD, TianAn Cyber Park, Futian District, Shenzhen 518048,.China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Able of what K31 series can test


ItemsANSI® No.
IEC61850 numerical IEDs relay & merge unit
Distance protection relay21
Synchronising or synchronism-check relays25
Undervoltage relays27
Directional Power relays32
Undercurrent or underpower relays37
Negative sequence overcurrent relays46
Overcurrent/ground fault relays50
Inverse time overcurrent/ground fault relays51
Power factor relays55
Overvoltage relays59
Voltage or current balance relays60
Directional overcurrent relays67
Directional ground fault relays67N
DC overcurrent relays76
Phase-angle measuring or out-of-step protection relays78
Automatic reclosing devices79
Frequency relays81
Motor overload protection relays86
Differential protection relays87
Directional voltage relays91
Voltage and power directional relays92
Tripping relays94
Voltage regulating relays
Overimpedance relays, Z>
Underimpedance relays, Z
Time-delay relays

Characteristic

  • 10 Channels (6x32A & 4x310V) outputs, Each output channels are independent and simultaneous control of magnitude, Phase angle and frequency values, able to inject DC, AC sine wave and up to 20x harmonics.
  • Variable battery simulator, DC 0-350V, 140Watts max.
  • 13 Low-level channels outputs up to 8Vac/10Vdc max.
  • 0-600V / 0-5A AC/DC measurement in 0.1 class.
  • Graphical test modules and templates for testing of various relays
  • Quick relay testing facility in Manual mode
  • Shot/Search/Check, Point & Click testing
  • RIO/XRIO import & export facility
  • Switch on to fault test(SOTF)
  • Power system model for dynamic testing
  • Inbuilt GPS and IRIG-B sync end-to-end testing
  • Online Vector display
  • Automatic test results assume
  • Automatic test report creation
  • Anti-clipping detect, Wrong wiring connect alarm and self-protect, overload and overheat protection


Transducer module use for testing standard and multi-function single and three phase electric power transducer


Fig Transducer calibration software interface

Parameter Setting

Transducer property setting, select parameter/ test object, find below Fig


Fig Testing object

Enter into transducer property setting interface, set the relative setting according to the manufacturer parameter of tested transducer.

Fig Parameter setting

Fig Parameter setting


In the transducer testing view, enter setting selection, select measure quantity through the output type of tested transducer, test method can be selected freely by testing.

Test Procedure

1) Test Connection

Fig Testing connection

Above testing connection use power transducer of example for explanation, other type transducer connection will regard the manufacturer` s request as standard.

2) Testing Procedure

Follow above requested to completely Set testing parameter and connection, add test point, start to test, test device calculate error automatically according sampling value

China Anti - Clipping Detect Transducer Calibration Tester K3163i Automatic Test Results Assume supplier

Anti - Clipping Detect Transducer Calibration Tester K3163i Automatic Test Results Assume

Inquiry Cart 0