

Add to Cart
2A/115V 1A/230V Power Supply Single Output 60W
Description:
Low cost
Built-in EMI filter
Low output ripple&noise
Approvals: UL,CE
Protections: Over load/Short circuit
2 years warranty
Technical Data
Index Type | S-60-5 | S-60-12 | S-60-15 | S-60-24 |
DCVoltage | 5V | 12V | 15V | 24V |
Voltage Tolerance | ¡À2% | ¡À1% | ¡À1% | ¡À1% |
Rated Current | 12A | 5A | 4A | 2.5A |
CurrentRange | 0-12A | 0-5A | 0-4A | 0-2.5A |
Ripple&Noise(Max.) | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p |
Line Regulation | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% |
Load Regulation | ¡À1% | ¡À0.5% | ¡À0.5% | ¡À0.5% |
Rated Power | 60W | 602W | 60W | 60W |
Efficiency | 73% | 76% | 77% | 79% |
Voltage Adjust Range | +10 -5% | ¡À10% | ¡À10% | ¡À10% |
VoltageRange | 85¡«264VAC 47¡«63Hz;120¡«370VDC | |||
AC Current | 2A/115V 1A/230V | |||
Inrush Current(Max.) | cold start current¡¡30A/115V 60A/230V | |||
Leakage Current | <3.5mA/240VAC | |||
Overload Protection | 105%¡«150%TYPE£ºOUTPUT CUTOUT¡¡AUTO RECOVERY | |||
Over-voltage Protection | 115%-135% | |||
Over-temperature Protection | ...................... | |||
Temp.Coefficient | ¡À0.03%/¡æ(0¡«50¡æ) | |||
Setup.Rise, Hold Time | 800ms, 50ms, 10ms/115VAC 300ms, 50ms, 80ms/230VAC | |||
Vibration | 10¡«500Hz, 2G 10min, /1cycle, 60min, each axes | |||
Withstand Voltage | I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC | |||
Isolated Resistor | I/P-O/P, I/P-FG, I/P-, FG:500VDC/100M¦¸ | |||
Working Temp.Humidity | -10¡æ¡«+60¡æ(REFER TO CHARACTER CURVE), 20%¡«90RH | |||
Storage Temp.Humidity | -20¡æ¡«+85¡æ, 10%¡«95%RH | |||
Dimension | 159¡Á97¡Á38mm | |||
Weight | 0.55Kgs | |||
Safety Standards | UL1012 TUV 60950(IEC950, UL1950) | |||
EMC | CLSPR22(55022), IEC801-2, 3, 4, IEC555-2 |
Note£º
1.All parameters NOT specially mentioned are measured at 230VAC
input , rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance, line regulation and load
regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12
twisted pair-wire terminated with a 0.1uf&47uf parallel
capacitor.
4.line regulation:min&max voltage of the rated load.
5.load regulation:load from 0 to 100%.