

Add to Cart
Single Output 350W
Description:
Low cost
Built-in EMI filter
Low output ripple&noise
Approvals: UL,CE
Protections: Over load/Short circuit
2 years warranty
Technical Data
Index Type | S-350-5 | S-350-7.5 | S-350-12 | S-350-13.5 | S-350-15 | S-350-24 | S-350-27 | S-350-48 | |
DC Voltage | 5V | 7.5V | 12V | 13.5V | 15V | 24V | 27V | 48V | |
Voltage Tolerance | ¡À2% | ¡À2% | ¡À1% | ¡À1% | ¡À1% | ¡À1% | ¡À1% | ¡À1% | |
Rated Current | 50A | 40A | 29A | 26A | 23A | 14.6A | 13A | 7.3A | |
CurrentRange | 0-50A | 0-40A | 0-29A | 0-26A | 0-23A | 0-14.6A | 0-13A | 0-7.3A | |
Ripple&Noise(Max.) | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p | |
Line Regulation | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | |
Load Regulation | ¡À1% | ¡À1% | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | ¡À0.5% | |
Rated Power | 250W | 300W | 348W | 351W | 348W | 350.4W | 351W | 350.4W | |
Rated Power | 74% | 79% | 74% | 80% | 78% | 83% | 83% | 84% | |
Voltage Adjust Range | 4.5-5.6V | 6-9V | 10-13.2V | 12-15V | 13.5-18V | 20-26.4V | 26-32V | 41-56V | |
VoltageRange | 90¡«132VAC/180-264VAC 47¡«63Hz;255¡«370VDC | ||||||||
AC Current | 4.5A/115V 2.5A/230V | ||||||||
Inrush Current(Max.) | 25A/115V 50A/230V | ||||||||
Leakage Current | <3.5mA/240VAC | ||||||||
Overload Protection | 105-145% TYPE£ºOUTPUT CUTOUT¡¡AC Restart | ||||||||
Over-voltage Protection | 115%-135% | ||||||||
Over-temperature Protection | RTH3¡Ý50¡æFAN ON, ¡Ü45¡æ FAN OFF, ¡Ý80¡æ OUTPUT CUTOUT(5-15V) | ||||||||
Temp.Coefficient | ¡À0.03%/¡æ(0¡«50¡æ) | ||||||||
Setup.Rise, Hold Time | 200ms, 100ms, 20ms | ||||||||
Vibration | 10¡«500Hz, 2G 10min, /11cycle, 60min, each axes | ||||||||
Withstand Voltage | I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC | ||||||||
Isolated Resistor | I/P-O/P, I/P-FG, I/P-FG:500VDC/100M¦¸ | ||||||||
Working Temp.Humidity | -10¡æ¡«+50¡æ, 20%¡«90RH | ||||||||
Storage Temp.Humidity | -20¡æ¡«+85¡æ, 10%¡«95%RH | ||||||||
Dimension | 215¡Á115¡Á50mm | ||||||||
Weight | 0.9kg | ||||||||
Safety Standards | UL1950 | ||||||||
EMC | FCCpart1.5J¡¡class A |
Note£º
1.All parameters NOT specially mentioned are measured at 230VAC
input , rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance, line regulation and load
regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12
twisted pair-wire terminated with a 0.1uf&47uf parallel
capacitor.
4.Line regulation:min&max voltage of the rated load.
5.Load regulation:load from 0 to 100%