Roboduino Freeduino for Robotics Arduino Compatible
Brand Name:Roboduino With Atmega328
Certification:CE Rohs FCC
Model Number:Roboduino With Atmega328
Minimum Order Quantity:5pcs
Delivery Time:2-3 days
Payment Terms:TT advance paypal
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong
Address:
Room 620 ,yutian building , song lin road , Futian district ,Shenzhen , China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Roboduino : Freeduino for Robotics ( Arduino Compatible )
The Roboduino is a Freeduino (Arduino software compatible)
microcontroller board designed for robotics. All of its connections
have neighboring power buses into which servos and sensors can
easily be plugged. Additional headers for power and serial
communication are also provided. The kits come with the surface
mount parts pre-soldered. Skill level: Beginner to intermediate.
Features / Specs:
* 100% Compatible with Arduino software.
* Power buses along side pwm and analog pins easily accept standard
servo and sensor connectors.
* Powered can be supplied from USB, barrel plug or 3-pin male
header. You'll need a suitable power supply when driving multiple
servos.
* Dedicated UART 3-pin male header
* 6 PWM outputs with neighboring unregulated power pins
* 6 analog pins
* 14 digital pins
* Reverse polarity protection for board circuitry (not for
unregulated power pins)
* Optional I2C pull-up resistor locations
Parts list | ||
| qty | marker | desc |
| 1 | FT232RL | |
| 1 | 2.1mmx5.5mm power jack, fat legs | |
| 1 | IC2 preinstalled | 5V reg. DPAK LDO |
| 1 | D1 | schottky, 5A |
| 1 | F1 | 60V 0.4A Resettable PTC fuse (yellow) |
| 1 | Q1 | 16MHz crystal |
| 1 | RESET | 6x6 flat tactile switch, thru hole |
| 2 | C6, C7 | 47uF 63V cap, 8mm dia, 3.5pin spacing |
| 1 | USB female type B | |
| 1 | R1 | 10k 1/4 W, short body |
| 2 | R2,R3 | 4.7K 1/4 short body |
| 5 | R7, R9, R10, R11, R12 | 1k 1/4 short body |
| 1 | R8 | 330 ohms, 1/4W short body |
| 1 | ATMEGA328 | |
| 8 | all except 22pF spots | .1uF caps, 5mm lead spacing |
| 2 | C2, C3 | 22pF |
| 1 | 28 pin .3 IC socket | |
| 3 | 1x8 header | |
| 3 | 1x5 | |
| 4 | 1x3 | |
| 1 | 2x3 for ISP | |
| 6 | 1x6 | |
| 1 | covers 2 of the three pins near the USB connector. Closer to USB means powered by USB, closer to barrel jack powers board from power. | jumper shunt |
| 2 | RX and 13 (note: longer lead goes into round side, or the side closest to the ATMEGA168 | 3mm led red |
| 2 | PWR and TX (or how you like) | 3mm led green |
| 1 | pcb | |
| 1 | USB CABLE, | |
| 1 | C11 (on bottom) | .1uF cap 1206 |
Roboduino Freeduino for Robotics Arduino Compatible
Inquiry Cart
0