DC 5V - 24V CSMA, CA wireless digital capture device / zigbe data acquisition / IO devices

SZ08 wireless digital capture device / zigbee wireless data acquisition / IO input and output devices

Brand: SHUNCOM
Transmission distance: 200 ~ 2000 m
Transfer Mode: Transparent, instruction format
Transmit Power: 3/18/25 (dbm)
Wireless Frequency: 2.4G ISM band global free
Channel mode: 16-channel
Input voltage: DC5 ~ 24V wide voltage
Interface Type: RS485/IO terminal

SZ08 Series Z-BEE wireless data acquisition devices, using the Z-BEE enhancedwireless technology, industry-standard application of wireless data communications equipment, it has a communication range, and anti-interference ability, flexible networking, and other advantages and features; multiple devices can be realizedbetween data acquisition and data transmission; can set type of mesh mESHnetwork structure.

Performance characteristics
Equipment, the main function: pairs, IO input controls the output level state, the wireless transmission through the middle, high and low input can be open or closedstate of the switch;
Device driver capabilities: input and output voltage DC 5V ~ 24V wide voltage, output current 100MA, can drive the relay;
Equipment cable interface: RS485 interface;
Transmission modes are available: Z-BEE 485 wireless or cable transmission;
Wireless powerful: with relay route and terminal equipment;
Communication distance: maximum transmission distance of 2000 meters line of sight;
Anti-interference ability: 2.4G DSSS spread spectrum technology;
Serial Application flexibility: transparent mode or command format for transmission, the maximum baud rate of 115200;
Flexible transmit mode: transmit or broadcast destination address to send mode selectable;
Flexible node types: the central node, routing nodes, terminal nodes can be arbitrarily set;
Networking ability: Star network, tree network, chain network, mesh network;
Network capacity: 16-channel selectable, 65535 Network ID can be set.

Specification Model

Technical Data
Main functions: in pairs, IO input controls the output level state, the wirelesstransmission through the middle, high and low input can be open or closed state ofthe switch;
Drive capacity: input and output voltage DC 5V ~ 24V wide voltage, output current100MA, can drive the relay;
Transmission distance: SZ06-200M (200 meters);
SZ06-800M (800 meters);
SZ06-2KM (2000 m);
Radio frequency :2400-2485M 2.4G ISM band for free;
Channel mode: 16 channels, can be specified or automatically select the bestchannel;
Channel detection: CSMA / CA;
Wireless speed: fixed 250K;
Antennae: 2.4G SMA external antenna;
Network structure: star, chain, tree, mesh;
Single network capacity: 65535 nodes;
Transmit mode: transmit or broadcast destination address to send;
Input voltage: DC-5 ~ 24V wide voltage;
Average power consumption: SZ06-200 (0.4W);
SZ06-800 (0.5W);
SZ06-2K (0.7W);
Transmit Power: SZ06-200 (3dbm);
SZ06-800 (18dbm);
SZ06-2K (25dbm);
Serial speed: Baud Rate 1200-115200 can set your own;
Interface type: RS485;
Standard configuration: AC 220V switch DC9V power adapter; gain 3DBI Glue stick antenna; 6-pin cable terminals;
Optional: feeder with suction cups to extend the antenna, and other non-standarddevices or special technical request.

Products should be used
Remote automatic meter reading AMR system
Food safety traceability system
Wireless street light control system
Modern agriculture greenhouse system
ZigBee smart home, smart home, smart cell
RFID data transmission
Instrumentation data collection and transmission
Wireless sensor data acquisition