

Add to Cart
Low-cost short-range NRF24L01 + 2.4G wireless module
Description:
NRF24L01 + 2Mbit / s 1Mbit / s 250Kbit / s transfer rate three
options
Parameters:
1) 2.4Ghz ISM band, license-free worldwide use of open
2) The maximum operating rate of 2Mbps, efficient GFSK modulation,
anti-interference ability, particularly suitable for industrial
control applications
3) 126 channels, multi-point communications and frequency hopping
to meet thecommunication needs
4) Built-in CRC error detection hardware, postal address, and
multipoint control
5) low-power 1.9 - 3.6V, standby mode state is 22uA; 900nA
Power-down modeis
6) Built-in 2.4Ghz antenna, compact 15mm X29mm
7) The module can be software based address, only the address of
the machineonly when the received output data (interrupt
instructions provided), can be directlyconnected using a variety of
single-chip, software programming is very convenient
8) Built-in special voltage regulator circuit, using a variety of
power supplyincluding DC / DC switching power supply has good
communication results
9) DIP spacing standard interfaces for embedded applications
10) Work in Enhanced ShockBurst with Automatic packethandling, Auto
packet transaction handling, with optional built-in packet response
mechanism, greatlyreduce the packet loss rate.
11) with 51 computers connected P0 port when the need to add 10K
pull-upresistors, do not connect with the rest of the mouth.
12) other series of microcontrollers, if it is 5V, please refer to
the MCU IO portoutput current size, if more than 10mA, requires a
10K resistor in series.
Board: FR4
Thickness: 1.0MM
Surface treatment: gold-plated
Black and white characters in the oil cap