Low cost of small air to water heat pump monobloc system
Brand Name:HISEER
Certification:CE EN14511
Model Number:AW13-DNNNE
Minimum Order Quantity:2 pieces
Delivery Time:10-15 days after TT payment
Payment Terms:TT payment
Contact Now
Add to Cart
Active Member
Location:
Guangzhou Guangdong
Address:
Xicheng Industry Zone, Renhe Town, Baiyun District, Guangzhou, Guangdong, China
Supplier`s last login times:
within 29 hours
Product Details
Company Profile
Product Details
Low cost of small air to water heat pump monobloc system
AW13-DNNNE, Air-source heat pump, often used in moderate climates,
use the difference between outdoor air temperatures and indoor air
temperatures to cool and heat your home, at the same time to supply
domestic hot water.
HISEER AW13-DNNNE, galvanized sheet, high efficiency air to water
heat pump, 380-415V/3/50Hz, R410a refrigeration, designed and
tested by EN14511, approved by TUV china branch, adopt the
following world famous parts:
* SWEP or GEA plate type heat exchanger
* Siemens controller
* Daikin scroll compressor
* Schneider A/C contactor
* Emersion thermal expansion valve
* Emersion dry filter
*Soft start is standard part
How does a air source heat pump work?
An air source heat pump is made up of three main components - an
evaporator coil, a compressor, and a heat exchanger.
The evaporator coil is fitted to the outside of an external wall.
It absorbs heat from the outside air. The compressor pushes the
refrigerant gas through the system compressing it until it is at
the desired temperature (typically up to 35-40 degrees Celcius).
The hot refrigerant then passes through the heat exchanger where
the heat from the refrigerant is transferred to water or air.
the operation of a heat pump can be reversed and used to cool down
the air in a building by radiating it outside - behaving in exactly
the same way as a refrigerator.
Coefficient of performance
ASHPs supply more energy than they consume. By extracting heat from the surrounding air, the heat energy released can be up to 3 times the energy required to power the equipment. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Heat pumps are measured by their coefficient of performance (COP).
The COP for air source heat pumps is very similar to that for
ground source heat pumps at approximately 2-3. With a COP for
instance of 3, 3 units of heat are produced for every 1 unit of
electricity consumed. (The two free units of heating were extracted
from the outside air). Even with ambient air temperatures of -10 to
-15 degrees Celsius, an air source heat pump can extract useful
heat (i.e. > 1 unit of heat generated per unit of electricity
consumed). Advantages: · Easy installation · Utilization all the year round for heating, cooling as well as hot water · Low investment costs with high quality · Silent operation · Reducing your carbon emission · Enjoying your green life by installing HISEER heat pumps · Reducing your heating and cooling bill with high efficiency HISEER heat pumps AW13-DNNNE technical data
The above data is tested by EN14511 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Low cost of small air to water heat pump monobloc system
Inquiry Cart
0