D630 Laptop Super vocom V2.4 9998555 with + PTT+ PTT Develop model + Devtool.exe

D630 laptop with Super vocom 9998555 pro v2.4 +PTT+ PTT Develop model + Devtool.exe

Super vocom 9998555 with D630 With PTT Software for truck excavator penta diagnostic

D630 laptop with Super vocom 9998555 pro v2.4 +PTT+ PTT Develop model + Devtool

vocom V2.4 Full Set Of PTT Developer Dev2tool exe Laptop Support 28 Languages

vocom Full Set of PTT+ Developer+dev2tool exe+laptop+ vocom Interface 9998555

Interface 9998555 for Truck and Excavator
vocom V2.4
PTT 1.12
Developer Actived

dev2tool exe Actived
1. Dealer tool to access and program parameters in Level2 and Level3 without connecting to central severs;
2. Works with Tech Tool (vocom Pro), Normal or Development mode, support 28 languages;
3. Support all brands and models supported by Tech Tool (vocom Pro);
4. Make programmable more than 11000 parameters.
5. Program speed limit, change chassis ID, disable immobilizer;
6. Change minimum/maximum values of parameters, for example: increase speed limit;

Truck Corporation is the second-largest heavy-duty truck brand in the world, and it fully equipped by all kind of electronic systems. Genuine Service is always performed by skilled and trained mechanics using the best tools and Genuine Parts. Whether in the workshop or by a Action Service roadside team.

vocom Pro (Vehicle Computer Aided Diagnostic System and Programming), VTT( Tech Tool),RTT( Tech Tool),PTT(Premium Tech Tool), is the after market tool for diagnostics, calibration, and programming support. This program is used when working on vehicles with engine electronics 1992 and later. This tool enhances the diagnostic and programming attributes of the vehicle. Utilizing the J1587/1708 information link. vocom Pro has the ability to perform task such as engine compression test, calibration of the instrument cluster, and programming of software and customer parameters.Also our communication adapter possible to use with MATRIS" MAchine TRacking and Information System .MATRIS - The purpose of the application is to collect technical information about Construction Equipment's products in use and present the information to the operator, and forward it to certain sites, as the main office of Construction Equipment.The information is accumulated and stored in the ECUs (processor) of a machine during the life cycle of the machine. The process of collecting information is called reading.The processing of the information into compiled presentation material in the PC gives a comprehensive understanding about the usage and the quality of the machines
Datalink interface which produces our company for "vocom Pro" working well with all trucks produce from 1992 to now days.
Also our datalink adapter (interface/translator device), (with different connection cables ) and program "vocom Pro" can communicate with trucks, buses and construction "" Loaders, Excavators, Scrapers (look for full inventory).
This adapter compliant with 9998555 (communication block),and recommended for heavy duty work.

Apply to the D630 (multi-languages)

This software supports VN, VT, VHD, WG, WX and AC from model year '98 forward.
vocom Pro 2.40.00 offers an excellent software tool to assist customers and bodybuilders in performing their own diagnostic work on engines.
Tests for fault tracing of D7C, D11F, D12B, D12C, D12D, D13F, D16D and D16F engines are incorporated into PTT.

vocom is a windows - Base software tool developed to test, calibrate and program parameters on ECUs.

vocom provides tests and calibrations for vehicles that are equipped with the Vehicle Electronics '98(VECTRO II) or Version 2 electronic control systtems. The application consists of a number of standrd graphical interfaces, such as graphs and continuous displays of parameters values. The operations are organized in the menu according to function groups. Some ECUs have changeable parameters that can be use to adjust or customize certain functions. ECUs often have two types of parameters: Customer parameters and Vehicle paameters.

Adjustments and improvements

- Support for new models: FL and FE
- The Option dialog in the Tool menu has been updated.
- Manually entered chassis series are validated on the local computer.
- Possibility to correct parameter values that are incorrect according to specifications. Parameters with values that are not valid are marked with red color. Previously, this situation caused an error that interfered with parameter programming.
- Help desk tool is updated. The actions 1 - Update phone book and 3 - Change connection type are found under 1 - Central Communications Settings.
- Campaigns which have been downloaded in intermediate storage mode but are not reported will, after 30 days, be reported as not performed for safety reasons.
- If the hardware part number in the control unit differs from the hardware part number stored in the central systems, vocom Pro will automatically check if there is an appropriate conversion kit available. If this is the est, a dialog box appears asking the user to run the conversion kit.
- New procedure for downloading of new versions of vocom Pro.
- If there is unused or unreported software stored in Intermediate Storage, the user will be notified and have the possibility to view more detailed information.
- Help text updated with instructions for parameter programming by templates, the new Option dialog and information about new functionality in intermediate storage.
- Campaign handling will from now be reported after programming is finished and not at the next authenticated connection to central systems.
- The operation conversion kit has been split into two operations: Conversion kit and Accessory kit.
- Oscilloscope related operations for special tool 88890040 have updated oscilloscope software.
- Support tool 9998555 and 88890020

Package Contents:

1. Communication unit, connected between the vocom Pro tool and the vehicle communication socket.
2. Communication unit vocom connection diagnostic connector 25P extension cords.
3. RS232. Of communication the unit vocom and PC cable
4. 6 pin diagnostic adapter, for Penta.
5. Adapter for EDC. Used together with communication unit for the 9–pin communication outlet in the vehicle EDC before 1994.
6. Adapter for DXI. Used together with communication unit for the 12–pin outlet in the vehicle DXI(VF627).
7. 9 pin diagnostic adapter, for vehicles built from January 1999. (Applies only to North American models).
8. Cable for connection between communication unit and the vehicle communication outlet. OBD-connector FE and FL, DXI.(88890018)
9. Cable for connection between communication unit and the vehicle communication outlet. OBD-connector BUS B12 ( 9998960)
10.14 pin diagnostic adapter, for construction.
11.Adapter for ABS. Used together with communication unit for the 8–pin communication black outlet in the vehicle before 1998.
12. D630 laptop with vocom pro v2.4 +PTT+ PTT Develop model + Devtool

JIU TECH Enterprise Co., Ltd specializes in development and production of auto diagnostic scanners and auto maintenance tools for years. We provide better quality products and service for our clients. OEM, ODM manufacturing service for business all over the world is appreciated. Our products have been delivered to Europe, America, Africa and Oceania, all over the world, bringing us annual export sales of $2 million last year.

Emphasis on product quality

We develop and manufacture auto diagnostic tools, car keyless remote controller, car key shell, transponder key, remote key, remote control duplicator and other auto maintenance tools etc. To ensure the consistency of our product quality, Our QC members with five years' experience on average monitor the entire production process.

We also offer a one year warranty.

Emphasis on Management
We insist on high standard, scientific development thoughts, devoted to pursuing continuous creativity of technology and management. Relying on the advanced equipments and high & stable quality, We have been approved by ISO9001:2000, FCC, CE. We benefit all our customers without any trouble of product quality.

We possess an 800-square-meter factory equipped with five production lines. Our advanced equipment includes automatic chip SMT lines, dust-free vacuum refilling machines and dust-free vacuum packaging machines. We produce 1, 000 units every month. Our delivery lead time is just one or three working days for our standard products. OEM products lead time is only within 2 weeks..

Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.