Diagnostic Software Support Max Speed Limit Auto Diagnosis Tool

Multilanguage Developer Tool for Vocom V4 FH Version 2.03 Support Max Speed limit Dev2tool Developer Tool

Detailed Product Description

PTT 2.03 vocom 3.0 Developer Tool For PTT 2.03 Development Model

developer tool software used together with PTT2.03 will allow you to program 11500 parameters using
standard 88890020 and 88890300/88840133 usb diagnostic interface.
(speed programming, injectors programming, change CHASSIS ID , dissable immo , trip kilometers correction and fuel consumption saved in ECU , ........... )

Please note: be sure your hardware is: 88890020 and 88890300/88840133 original, currently don't support 9998555 hardware.

Install Way:

we send software hard disk for D630 Laptop and you could insert the hard disk to your laptop.
It could use directly when you get it.
This hard disk inculd PTT 2.03 software with Developer Tool for PTT development model.

Dev2tool.exe Premium Tech Tool PTT Development Model vocom Super Programming Software
Premium Tech Tool developer tool

Super Programming Software Premium Tech Tool software with PTT software in development model
Premium Tech Tool PTT Development Model with developer tool software
We will also open the PTT software into Development Model for you.

Truck Excavator Super Programming Software Premium Tech Tool dev2tool.exe software
Premium Tech Tool developer tool
1. Dealer tool to access and program parameters in Level2 and Level3 without connecting to central severs;
2. Works with Tech Tool (vocom Pro), Normal or Development mode, support 28 languages;
3. Support all brands and models supported by Tech Tool (vocom Pro);
4. Make programmable more than 11000 parameters.
5. Program speed limit, change chassis ID, disable immobilizer;
6. Change minimum/maximum values of parameters, for example: increase speed limit;

Premium Tech Tool (PTT) is an application for the Aftermarket, developed to support efficient service and diagnostics. Premium Tech Tool is available as a connected version or as an unconnected version. The unconnected version is called Premium Tech Tool Connectionless (PTTC) and that is that we offer. PTTC is used in workshops that do not have internet access, but both versions are referred to as PTT. PTT provides access to the Guided Diagnostics and vocom.

Test Function:

1-Service and maintenance

2-Engine, Engine mounting and equipment

3-Electrical system and instruments

33311-3-Preheat, Test

33445-3-Ignition Switch, Test

36303-3-Intermittent Wiper, Test

36415-2-Switch Lamp, Test

36421-3-Position Switch Back-up(Reversing) Lamp, Test

36423-3-Lever Switch High Beam/Low Beam, Test

36424-3-Stalk Switch Direction Indicator, Test

36491-3-Steering Wheel Buttons, Test

36603-3-Anti-theft Alarm Status, Test

36607-3-Logged anti theft alarm activation, read out

36614-3-Load Indicator, Test

36622-3-MID 163-Transponder Reading, Test

36624-3-MID 163-Key Counting, Test

37173-3-Data Links, Fault Tracing with Oscilloscope

38117-3-Instrument Cluster, Test

38118-3-Gauge Checks, Instrument Cluster

38356-3-Calibration Number, Test

38440-3-Brake Contacts, Test

39203-3-Audio Unit Function Test

39746-3- Link, GPS, Test

39747-3- Link Satellite Communications Test

4-Transmission

40001-3-Starting gear selection, read out

40005-3-Range Inhibitor, Test

40010-3-Clutch Cylinder, Test

40012-3-Gear Selector Position Sensor, Test

40015-3-Range Cylinder, Test

40016-3-Split Cylinder, Test

40020-3-Gears, Test

40023-3-Transmission Speed Sensor, Test

40024-3-Oil Sensor Signals, Test

40025-3-Solenoid Valves, Test

40026-3-PWM valves clutches and brakes, test

40027-3-PWM Valves Main Pressure and Brake Pressure, Test

40028-3-Lockup and Retarder, Test

40083-3-PWM Valves Clutch, Test

40087-3-Pressure Sensor, Test

40091-3-Gear Activation, Control Housing (for Removal/Replacement)

40098-3-Gears, Check Oil Pressure, Test

40112-3-Gear Selector, Test

40145-3- Solenoid Valves Measuring, Test

40170-3-Inhibit Cylinder, First Gear, Test

41126-3-Clutch Wear Check, Test

41180-3-Clutch Drag, Test

41181-4-PWM Valves Clutch Activation, Test (Transmission Removed)

41182-3-PWM Valves Clutch Activation, Test

43116-4-Gears, Test (Transmission Removed)

43121-3-Gear Selector Cylinder 1/Reverse, Test

43122-3- Gear Selector Cylinder 2/3, Test

43126-3-Counter Shaft Brake Solenoid Valve Test

43128-4-Solenoid Valve, Brake Counter Shaft, Test (Transmission Removed)

43194-3-Input Signals for Gear Selection, Test

43773-3-Vehicle Inclination Sensor, Test

48141-3-Power Take-off Pressure, Clutch, Check

5-Brakes

50006-3-Brake Pads, Test

50011-3-Modulators, Test

50012-3-Foot Brake Valve, Test

50013-3-TCS Function Shut off, Test

50016-3-Wheel Speed Sensor Signal Voltage, Test

50017-3-Foot Brake Valve Signal Voltage, Test

50020-3-Wheel Speed Sensor, Test

50021-3-Brake Adaptation

56023-3-Pneumatic System, Status

56186-3-Air Dryer Solenoid Valves, Test

56362-3-Parking Brake Switch, Test

59110-3-Control Auxiliary Brake, Test

59221-3-Pressure Setting Retarder, Test

59222-3-Function Retarder, Test

59242-3-PWM Valve Retarder, Test

59297-3-Temperature Sensor, Test

59302-3-Wheel Speed Sensor ABS, Test

59303-3-Tooth Wheel ABS, Test

59305-3-Solenoid Control Valves, ABS, Test

59306-3-The ABS Control Unit, Test

59318-3-Foot Brake Valve Backup, Test

59364-3-EBS Control Unit Input / Output Signals Status, Test

59371-3-ESP Function Switching On and Off, Test

59376-3-Activate ABS Valve, Test

6-Axles, suspension and steering

64538-3-Control Valve, Test

64720-3-ECU, Electronically Controlled Hydraulic Axle Input Output Status, Test

7-Frame, springs, shocks and wheels

72873-3-External Signals to ECS, Test

72874-3-Control Box, Test

72875-3-Pressure Sensor, Test

72876-3-Level Sensor, Test

72877-3-Solenoid Valves, Test

72880-3-Lift Axle Switch, Test

72885-3-Air Suspension System Module In-Output Signals Status, Test

72887-3-ECS System status, test

72905-3-Additional Functions ECS, Parameter Test

72928-3-Verify Level Sensor Calibration, Test

77601-3-Tire Pressure Monitoring Truck, Test

77615-3-Tire Pressure Monitoring Trailer, Test

8-Body, cab and interior

87518-3-Parking heater timer, readout and resetting

9-Miscellaneous

93003-3-Bodybuilder Module Input / Output Signals, Test

Calibrate

1-Service and maintenance

2-Engine, Engine mounting and equipment

3-Electrical system and instruments

4-Tansmission

5-Brakes

6-Axles, suspension and steering

7-Frame, springs, shocks and wheels

8-Body, cab and interior

9-Miscellaneous

Program

1-Service and maintenance

2-Engine, Engine mounting and equipment

3-Electrical system and instruments

4-Tansmission

5-Brakes

6-Axles, suspension and steering

7-Frame, springs, shocks and wheels

8-Body, cab and interior

9-Miscellaneous

Communication Unit

VOCOM/88890020/88840133

Supported Protocols

SAEJ1939, ISO15765, SAEJ1587

vocom Pro Development Content

JIU TECH Enterprise Co., Ltd specializes in development and production of auto diagnostic scanners and auto maintenance tools for years. We provide better quality products and service for our clients. OEM, ODM manufacturing service for business all over the world is appreciated. Our products have been delivered to Europe, America, Africa and Oceania, all over the world, bringing us annual export sales of $2 million last year.

Emphasis on product quality

We develop and manufacture auto diagnostic tools, car keyless remote controller, car key shell, transponder key, remote key, remote control duplicator and other auto maintenance tools etc. To ensure the consistency of our product quality, Our QC members with five years' experience on average monitor the entire production process.

We also offer a one year warranty.

Emphasis on Management
We insist on high standard, scientific development thoughts, devoted to pursuing continuous creativity of technology and management. Relying on the advanced equipments and high & stable quality, We have been approved by ISO9001:2000, FCC, CE. We benefit all our customers without any trouble of product quality.

We possess an 800-square-meter factory equipped with five production lines. Our advanced equipment includes automatic chip SMT lines, dust-free vacuum refilling machines and dust-free vacuum packaging machines. We produce 1, 000 units every month. Our delivery lead time is just one or three working days for our standard products. OEM products lead time is only within 2 weeks..

Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.