Product Details
12V250AH Lithium Lifepo4 Battery, Deep Cycle Batteries Built-In
200A BMS
About this item:
- 【Deep Cycle & Long longevity】 How is the longevity of this
battery? If not charged to 100% and not discharged to 0%, leaving
about 10% on charge and discharge, LiFePO4 battery life can be
recycled up to 4000-8000 times and lives up to 10 years. Just be
sure to get a battery charger specifically designed for lithium
iron phosphate batteries.
- 【Automatic BMS and Quickly Charge】 Compared to other chemistries,
LiFePo4 offers higher energy density, more stability at higher
temperatures, and better performance, making the batt charge
quickly, discharge flatly, and last longer. Our battery built-in
BMS protects it from overcharge, deep discharge, overloading,
overheating and short circuit, and low self-discharge rate ensuring
up to one 1-year maintenance-free.
- 【Uncompromising Quality】 State-of-the-art battery cells ensure a
lifespan of more than 5000 cycles, 150A continuous discharge
current, and a wide operating temperature range.
Battery specifications:
No. | Items | Specifications |
Remark
|
1 |
Capacity for assembled cell discharging by 0.2C
| ≥202AH |
Standard discharging method
|
2 | Battery Voltage |
12.8-13.2V
|
Delivery voltage, Within 10 days from Factory
|
3
|
Standard charge condition
|
Charge with 0.2C constant current and 14.6Vconstant voltage, charge
to 14.6V continue charging till current declineto ≤0.01C
| Charge voltage: 14.6V±0.02V Charge current:0.2C |
4 |
Maximum charge current
|
|
150A
|
For continuous charging mod
|
5 |
Maximum discharge current
|
| 150A |
For continuous discharge mod
|
6 |
Standard discharging method
|
0.2C constant current discharge to 8V,
| |
7 |
Internal Impedance
|
Assemblage Impedance
|
Measure two sides of the drawing line after assembling. .
|
8 | Net
| 23Kg | |
12V 250Ah Lithium Lifepo4 Battery
- Very high service life: from 3000 cycles to several ten thousand
- Possible deep discharges (up to 100%)
- Completely secure Lithium Iron Phosphate technology (no risk of
explosion or self-ignition)
- BMS (Battery Management System) integrated into the case: maximizes
the life and secures the battery
- No lead, no rare earths, no acid, no degassing
- Calendar life > 10 years
- Excellent temperature resistance (-20 °C to +60 °C)
- Flexible system: up to 16 packs in parallel and 4 in series
- Constant power throughout the discharge (low internal resistance)
- Very low Peukert losses (energy efficiency >98%)
- Very low self-discharge (<3% per month)
- No memory effect
- Weight gain > 50% and 40% less footprint compared to lead-down
batteries
- Certification: CE, RoHS, UL.
Safty performance:
No. | Items |
Test Method and Condition
|
Criteria
|
1 | Thermal exposure test
|
Each fully charged cell, stabilized at room temperature, is placed
in a circulating air-convection oven. The oven temperature is
raised at a rate of 5 °C/min ± 2 °C/min to a temperature of 130 °C
± 2 °C. The cell remains at this temperature for 10 min before the
test is discontinued.
| No fire, No explosion
|
2 | Low pressure
|
Each fully charged cell is placed in a vacuum chamber, in an
ambient temperature of 20~25℃. Once the chamber has been sealed,
its internal pressure is gradually reduced to a pressure equal to
or less than 11.6 kPa (this simulates an altitude of 15240 m) held
at that value for 6 h.
| No leakage, No fire, No explosion
|
3. | Short test
|
The fully charged battery is to be short-circuited by connecting
the positive and negative terminals of the battery with resistance
load not exceed 100mΩ. Tests are to be conducted at room
temperature 20~25℃.
| No fire, No explosion The Temperature of the Battery surface not exceeded than 150℃
|
4 |
Over Discharg
|
(After standard charge. Cells are discharged at constant Current of
0.2C to 2.0V, and the positive and negative terminal is connected
by a 30Ω wire for 24 hours. Cell Condition: Fresh, Fully charged
cell.)
| No fire, No explosion |
5 | Over charge test
|
After standard charge, continue to charge with a constant voltage
4.8V per a cell, holding 8h.
| No leakage, No fire, No explosion
|
6 | Soak Test
|
Put the batteries into clean water, be soaked for 24 hours.
| No break, No fire
|
Caution:
Risk of Fire , Explosion or Burns
DO NOT Short circuit
DO NOT Reverse connections from charger to battery
DO NOT Disassemble
DO NOT Throw into fire or incinerate
DO NOT Heat above 70C
Company Profile
Guangzhou Sunland New Energy Technology Co., Ltd. (Sunland Power) is a senior professional service provider of
battery application. Aiming at serving industrial users, it is
dedicated to providing industrial users with optimized battery
supporting solutions and safe, environmental friendly and
cost-effective battery products.
It has a R & D, engineering and management team with more than
10 years of industry experience
From upstream to downstream, the battery industry has the advantage
of vertical integration
Specializing in batteries, battery packs, battery management
systems and energy solutions
The products are widely used in medical devices, coal mine
security, electronic appliances, power supply and standby energy
storage system. For example, the power supply system of electric
bicycle; Solar energy storage power supply system, UPS backup power
supply system. At the same time, it is also an ideal choice for
vehicle starting power supply, military painting and other fields.
We provide professional design and customization services according
to the special needs of customers.