Add to Cart
No. | Item | General Parameter | Remark | |
1 | Combination method | 13S25P | Single cell 18650 2200mah 3.7v | |
2 | Combination standard for single cell | Capacity difference≤2% | Combination after 0.15C discharge to 2.5V | |
Resistance difference ≤10mΩ | ||||
Voltage difference≤8mV | ||||
3 | Rated Capacity | Typical | 50Ah | Standard discharge after Standard charge(package) |
Minimum | 50Ah | |||
4 | Nominal Voltage | 48V | Mean Operation Voltage | |
5 | Voltage at end of Discharge | 42V | Discharge Cut-off Voltage | |
6 | Charging Voltage | 54.6V | ||
7 | Internal Impedance | ≤100mΩ | Internal resistance measured at AC 1KHZ after 50% charge The measure must uses the new batteries that within one week after shipment and cycles less than 5 times | |
8 | Standard charge | Constant Current 10A Constant Voltage54.6V 0.01CA cut-off | Charge time : Approx 6 h | |
9 | Standard discharge | Constant current:10A end voltage 42V | ||
10 | Maximum Continuous Charge Current | 50A |
No. | Item | General Parameter | Remark |
11 | Maximum Continuous Discharge Current | 50A | |
12 | Operation Temperature Range | Charge: 0~45℃ | 60±25%R.H. Bare Cell |
Discharge: -20~60℃ | |||
13 | Storage Temperature Range | Less than 12 months : -20~25℃ | 60±25%R.H. at the shipment state |
less than 3 months: -20~40℃ | |||
Less than 7 day : -20~65℃ | |||
14 | Dimensions | L440*W440*T88(mm) | including the outer shell |
15 | Weight | 18kg | including the outer shell |
1) The BMS is designed for 13 series lithium battery.
2) The BMS have all functions which are :
If you are designing new residential back up power with energy of bigger capacity , you can paralle two or more standard module, we can provide all equipment including of the battery storage charger bms inverter or other components such us display unit , remote etc with your require.