Automotive Toyota Copy Key Programmer for LEXUS, Camry, JEEP, AVALON, PREVIA

Automotive Toyota Copy Key Programmer for LEXUS, Camry, JEEP, AVALON, PREVIA

Toyota copy key Description:

Desription:

Be suitable for the wafer key’s match of Toyota, such as LEXUS (LS400 ES300 GS300 IS2000 IS300) , Camry 2. 0, 2. 4, JEEP 2007 3400 4500 4700, AVALON, PREVIA.
Equip English using manual. Offer technology support.
From the date of purchase, we provide for a 18 month repair warranty with conditions.

Use for the following cars:
1. Es300 (1997-2003)
2. Gs300 (1997-2003)
3. Gs400 (1997-2000)
4. Gx430 (2001-2003)
5. Is300-IS200 (2001-2003)
6. Ls400 (1997-2000)
7. Lx470 (1998-2002)
8. Rx300 (1999-2003)
9. Sc300 (1998-2001)
10. Sc400 (1998-2001)
11. 4runner (1999-2003)
12. Avalon (1998-2003)
13. Cammry-4cly (1998-2005)
14. Highlander (2001-2003)
15. Lander Cruiser (1998-2003)
16. Mr2 (2000-2003)
17. Rav4 (2000-2003)
18. Sequoia (2000-2003)
19. Sienna (1998-2003)
20. Solara (1999-2003)
21. Previa (1999-2003)

Operations of key programmer:

Dismantle the engine ECU from the vehicle (or IMMO) , and take down the IC chip identified as "93C56" (fixed to the computer in the vehicle engine; for the Camry being IC601, and Lexus being IC900. Identification number for a chip fixed to IMMO is 93LC66) . Clean up every pin of IC to make sure of a sound connection.

Install 93C56 on the device through programmer; make sure that the connection is good.
Supply electricity to the programmer, the screen will show"can work normal"with a beep sound indicating that the machine is working well.
Press"R-key", and the red light"LED" will be lit; programmer is thus ready for programming.

Put the key on the key logo of the programmer.
Press R-key again to hear the beep sound beep 4 times, and the red light also goes off, these means that the key has been successfully programming to the programmer. If the beep sound is not made 4 times, then repeat the operation until you hear the exact 4 beep sound.
By the stated operations you can programming 3 keys to the programmer altogether.

Now you can verify whether the 3 keys have been actually programmed: press R-key, put a key near the key logo, if a 4-beep sound is made, that means the programming is effective. Every key must be verified so that they can be program to 93LC56 and 93LC66.
Press Pr-A, Pr-B and Pr-C orderly to programming the 3 programmed keys to 93C56 (or 93LC66) . When "OK" displays, the programming succeeds; otherwise"ERROR" signal appears. Failure may be due to misconnection between 93C56 and the programmer, or the reverse installation or corruption of the chip. In this case you better repeat the adaptation twice to ensure the success.

Now that IC-93C56 (or 93LC66) has three keys programed to it, you can now weld it to the engine ECU. Make sure the weld is good.
Fit the ECU back to the vehicle. With any of the previously programmed keys you can start the vehicle now.
Notice: This machine only provide for locksmiths. Please offer related business license, original ID card and need to sign the declaration with us.

Welcome to AOTO Tech Co., Ltd, Since 2006 AOTO TECH has been the key player in the automobile diagnostic tool industry. Now we are the Research & Development center and manufacturer of auto diagnostic tools. We provide better quality and service for auto diagnosis and programming products and the auto accessories. Meanwhile, OEM manufacturing service for business all over the world is appreciated. All of our customers are welcome to visit our factory. We make high focus on the customer's need and pay more attention to the quality of our products. As we just want to benefit all of our customers.

Better Products

We are willing to make more focus on the customer's need and pay more attention to the quality of our products. As we just want to benefit all of our customers. We develop and manufacture auto diagnostic tools, code readers, ECU chip tunning tools, auto ECU programmers, auto key programmers, auto diagnostic connectors, odometer correction kits, airbag reset kits, BMW&Opel diagnostic tools, VAG diagnostic tools, service interval resets, carsoft compatible interface, etc. Meanwhile, we provide OEM manufacturing for our worldwide clients.

Better Quality

With international standard control from R&D, testing and manufacturing, we are sure to provide products with best quality. Closely following ISO9141-2, ISO14230-4, QS9000, ISO9001 and TS16949, AOTO Tech will benefit our customers without any trouble of product quality.

Competitive Price

As one of the true few R&D centers and manufacturers of auto diagnostic tools in China, compared to the other suppliers, we can provide competitive price to benefit our customers, especially for large order.

Timely Delivery

We provide timely delivery to our customers. After we receive the payment, we will ship the products in 1-3 business days, and you can get the products in 4-7 business days. You can also track the delivery status through professional express website.

Technical Support & Service

We are sure to provide very good technology support and after sale service, as we have our engineers.
We are committed to providing technical support and after sale service as follow:
(1) One year for free update for the software.
(2) One year warranty for quality of all the components.
(3) We will provide technical support for free by phone or internet for whole life.

Good quality, best price and better technical support and service, make AOTO Tech Co., Ltd as your most valuable cooperator.