Past the host and magnet box on door and door can, it is ok.
Usage:
Boot: The SIM card inserted into the card connector, and then pull
the switch to "on" position, the red indicator light after 30
seconds the product is ready. This state can answer an incoming
call,
Fuction Settings:
Send SMS GDM1 : start vibration sensor control, when it vibrates , the product
will call your mobile.
Send SMS GDM2 stop vibration sensor control.
Send SMS GDM3 inquire electric quantity.
Send SMS GDM4 start magnetic sensor control, when the door was opened or closed,
the product will call your mobile.
Send SMS GDM5 stop magnetic sensor control.
When the funtion setting is success, you can puase or restore by
the switch.
Note:
* This machine is only inserted the SIM can be boot.
* Please pull the swich "on" position. when charge.
* The new machines need to be recharged 2-3 hours before first use.
Please use our distribute charger to protect host.
* Standby time: 100-150 hours . depending on the local network
signal strength may be.
* if the product can’t Auto-Answer: To confirm whether the GSM
card, this machine using a GSM network. View cell phone phone
signal is strong enough to install location.
Network type:(2 Select 1)
GSM900MHz/DCS1800MHz
GSM850MHz/DCS1900MHz
Accessories:
Host 1
Magnet bos 1
Charger 1
USB Charging Cable 1