Add to Cart
1. SWT-10 variable pitch wind turbine synopsis:
Keyword: Low wind speed start-up, Variable Pitch Regulation,
Unnecessary human monitoring
SWT-10 Variable pitch wind turbine, newly developed by SENWEI
ENERGY TECH INC, is a patented product and pioneer in domestic.
Wind turbine use independence-researched mechanism centrifugal
technologies to come true variable pitch function, tracking rotor
speed and synchronously regulate blade pitch automatically, to keep
wind turbine working safety at rate wind speed and to keep power
outputting stably and continuously even in the situation of facing
hurricane or strong wind and without human monitoring.
2. SWT-10 variable pitch wind turbine parameters:
Rotor diameter: | 8.0m |
Blades quantity: | 3pcs |
Direction: | always downwind |
Blades material: | Carbon fiber reinforced plastic |
Rated output: | 10000W |
Maximum output: | 12500W |
working voltage: | DC240V/500V,AC220V/380 |
Annual average energy production: | 20MWH (in rate 5m/s wind speed) |
working wind speed: | 3-35m/s |
Initial wind speed: | 2.0m/s |
Nominal wind speed: | 10.8m/s22.5mph |
Storm-stand: | up to 55m/s |
Max rotate speed: | 160r/min |
Wind turbine type: | Three-phase, PMG Alternator |
Working temperature: | from -40 to +60 oC |
Blade Pitch Control | Varies Pitch |
Over-speed Protection | aerodynamic brake+electromechanical disc brake |
Speed regulation methods: | Yawing and electric magnet Switch |
Gearbox: | None, Direct Drive |
Accumulators full charge time: | about 8 hours |
3.SWT-10KW Output power curue
4.Characteristics Features:
1. Optimization aerodynamic design at blade: high efficiency, low
noise.
2. Centrifugal variable pitch controlled mechanism: 3m/s low wind
speed startup; 4-11m/s wind speed, tracking wind turbine rotor
speed to synchronously adjust blade angle at optimum
tip-speed-ratio, high efficiency running; over rated wind speed
10.8m/s, wind rotor never goes to over speed and rotate stably;
3-25m/s wind speed, wind turbine run very smoothly.
3. Direct drive permanent magnet generator, low startup resistance
moment, constantly running ability of over loading 1.5 times,
maintenance free for more than 30000 hours.
4. Safety control: Have aerodynamic brake, electric magnet brake,
mechanical brake and manual stop mechanism. Adjust blade tip angle
automatically at negative value when encountering strong typhoon or
and the blade at stalled condition and meanwhile wind rotor
rotating speed was controlled and reduced.
5. Sealed slip ring, no cable twist; Carbon brush and slip ring are
clean; good conductivity for electricity transferring.
6. Streamline design, and handsome appearance
7. Long acting anticorrosive treatment, guarantee no corrosion in
15years.
5. SWT-10 Variable Pitch Principle:
The electrically controlled pitch system consists of a pitching
mechanism and a direct drive, brushless servo motor. If the pitch
motor speed is the same as the turbine speed there will be no
change in blade angle. If the speed of the motor is increased with
respect to turbine speed, the angle between the blade and the
rotation axis will increase and conversely if the speed of the
motor is decreased the blade angle will be reduced. In case of a
critical failure or loss of power, the pitch motor is
short-circuited. This will cause the blades to be automatically
feathered by the rotation of the rotor, which will then stop.
(Pat.pending)