Business license check OK
1 - 10 Results for metal testing equipment from 105199 Products
High Intelligence UTM Universal Testing Equipment with Professional Software 600MM 1000kgf
..., compression, flexural, peel, shear, tear, bursting, , fatigue tests for wire, metal foil, sheet metal and metal tape, rubber, plastic, air / sea foam, waterproof materials, wire and cable, textile fabrics, net rope, non-woven material by equipped with...
Infinity Machine International Inc.
Verified Supplier
No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China
Metal Test Equipment Universal Tensile Testing Machine with High Precise Ball Screw
...wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, ......
Hai Da Labtester
Verified Supplier
Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China
ISO 6925 Carpet Flammability Testing Equipment For Either The Hot Metal Nut Test
.... It can be used for either the hot metal nut test (BS 4790) or the methenamine tablet test (ISO 6925 and BS 6307). The test chamber is manufactured from non-combustible heat resistant board with a counter weighted sliding panel for easy access. The...
Dongguan Hust Tony Instruments Co.,Ltd.
Verified Supplier
No. 1,Tech 9th Road,High & New Tech Development Zone,Songshan Lake,DongGuan City,Guangdong Province
Digital Eddy Current Testing Equipment with TFT - LCD HEC-101 test for NF-metals
...Testing Equipment with TFT - LCD HEC-101 test for NF-metals Measuring range 1%IACS—105%IACS HEC-100series of eddy current electrical conductivity meters, which are designed for quick & convenient measurement of material property, such as material separate, quality control, material state check and so on. The products use the electromagnetism testing principle, can testing......
HUATEC GROUP CORPORATION
Verified Supplier
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
AC 220V 50Hz Needle Flame Test Equipment For Non Metallic Materials
... Testing Machine Combustion Test Equipment The needle flame testing machine is designed and manufactured according to the corresponding requirements of IEC60695-2-2, GB5169.5-97, GB4706.1-98, and is suitable for the flame resistance test of non-metallic ......
Shanghai Glomro Industrial Co., Ltd.
Verified Supplier
No.5616th, Caoan Road, Jiading District, Shanghai
ISO 9185 Molten Metal Splashes Resistant Test Equipment for Protective Clothing
...Metal Splashes Resistant Test Equipment Catalogs for EN 373&348&6942&367&702.pdf Introduction It is suitable to measure the resistance of protective materials to liquid metal splash.During test,certain molten metal splashes on sample which is installed at specified angel.Put a PVC film on the sample’s back to contact it.Record the change of PVC film after splashing to evaluate the damage situation.According to test......
Advanced Instruments Co.,Limited
Verified Supplier
Hi-tech Developing Industrial Area, Liuyang City,Changsha,Hunan Province,China
Dielectric Strength Test Instrument IEC 60065 Figure 6 Test Equipment
... Strength Test Instrument . Application: It is used to test the dielectric strength of the insulating materials. Test sample: Insulating materials. IEC Test Equipment Parameter: Metal pin mass 100g (50g optional) Metal pin diameter 5 mm ± 0.1 (Ф6.8...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
Verified Supplier
No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China
Metallic Power Cord Tension Torque Tester Electrical Cable Pull Twist Testing Equipment IEC60335-1:25.15
... IEC60335-1:25.15. The test equipment is mainly applied for testing the power cord tension and torque at the terminal two trials of the appliances which are with a power cord, and intended flexible cord permanently connected to the fixed ......
Guangzhou HongCe Equipment Co., Ltd.
Verified Supplier
No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou
IEC 62368-1 Annex G15.2.3 High And Low Temperature Tensile Testing Equipment Test Force 500kg
... tests of non-metallic materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, metal wires, metal foils, metal plates and metal rods. It can also be used with special fixtures. It is suitable for tensile,...
Sinuo Testing Equipment Co. , Limited
Verified Supplier
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
JJG 145 Plastic Testing Equipment For Impact Testing Velocity Of Striking 5.24m/S
... materials under dynamic loads. It can continuously and extensively do metal impact tests, and show the impact absorption power, impact toughness, rotation Angle of pendulum and printing test report (pointer type does not have these functions).It is an...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
Verified Supplier
No.168 Zhen'an West Road Changlian Industry Mansion Xiabian Community Dongguan China
Submit “metal testing equipment” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!
Business license check OK
